Thermodynamic Analysis of the Absorption of Common Refrigerants in Fluorinated Deep Eutectic Solvents

DEMIRBEK, MERVE GÖZDENUR ; RODRIGUEZ REARTES, SABRINA BELÉN; LLOVELL, FÈLIX

FLUID PHASE EQUILIBRIA

ELSEVIER SCIENCE BV

Año: 2024 vol. 581

0378-3812

The potential to decrease the negative environmental impact of greenhouse gases in terms of global warming potential (GWP) is a current challenge. Apart from CO2, fluorinated greenhouse gases (F-gases), which are human-made chemicals used in refrigeration and other industrial applications, have a huge environmental impact due to their high GWPs. In this regard, the design of units to capture and recover these gases would contribute to their reuse, avoiding the negative impact of their final emission or incineration. Fluorinated Deep Eutectic Solvents (FDESs) have been considered as promising solvents for the absorption and the selective separation of F-gases. However, the complex and expensive experimental labour to fully characterize FDESs delays its study and development. In this work, a computational approach is applied to develop accurate thermodynamic models of the gas solubility of several F-refrigerants in DESs. The molecular-based equation of state (EoS) soft-SAFT is used to assess the absorption of three F-gases (1,1,1,2-tetrafluoroethane (R-134a), difluoromethane (R-32), and pentafluoroethane (R-125)) at different temperatures in five DESs derived from fluorinated salts and perfluorinated acids. New molecular models are developed through the soft-SAFT approach for FDESs in good agreement with experimental data, and the solubility of F-gases is also calculated at varying temperatures with high accuracy. Then, an in-depth analysis of the characteristics of the refrigerants, and of the FDESs affecting the F-gases absorption is performed, and the enthalpy and entropy of absorption and the selectivity are calculated. It has been encountered that the best FDESs for each particular F-gas separation can be obtained by modifying the composition of DES and the operating temperature. Finally, an assessment based on the selectivity obtained from the soft-SAFT model is carried out to choose the most adequate solvent to separate the studied F-gases.