Capillary effects in vacuum assisted resin transfer molding with natural fibers

GASTON FRANCUCCI; ANALÍA VAZQUEZ; EDU RUIZ; EXEQUIEL S. RODRIGUEZ

POLYMER COMPOSITES

JOHN WILEY & SONS INC

Año: 2012 vol. 33 p. 1593 - 1602

0272-8397

The study of the capillary flow developed during the processing of composite materials is critical because it acts as an important driving force for the impregnation of the fiber tows. It is also a key mechanism on the void formation during infiltration of the fibers. In this study, capillary pressure of jute/vinylester composites was measured and the impact of capillary forces on fabric permeability was experimentally analyzed. It was found that the capillary pressure was significantly higher than in synthetic fiber fabrics. In addition the permeability resulted higher when the water/glycerin solution was used, because its higher compatibility with the fibers leaded to negative capillary pressures and enhanced flow. Therefore, the capillary pressure obtained in the constant pressure experiments was used to correct the applied pressure gradient in the permeability tests and thus a corrected value of permeability independent of the tests fluid was obtained.