Mechanical Properties Of Woodflour / Linseed Oil Resins Composites

MOSIEWICKI, MIRNA; BORRAJO, JULIO; ARANGUREN, MIRTA I.

POLYMER INTERNATIONAL

JOHN WILEY & SONS LTD

Año: 2005 vol. 54 p. 829 - 836

0959-8103

Abstract: The purpose of this project was to obtain new composites using filler and resin obtained from renewable resources, combining low cost and good mechanical properties. The matrix consisted of a polyester resin synthesized from linseed oil and further crosslinked with styrene in a peroxide-initiated reaction. Composite materials made from the unsaturated polyester/styrene thermoset and containing various percentages of woodflour were prepared and tested. The relationships between the filler content, porosity fraction, and mechanical properties of the materials were evaluated. The bending modulus and strength of the composites were significantly higher than that of the matrix. Simple models were successfully applied in the analysis of the mechanical properties of the materials. The porosity effect was also considered in the model predictions. The results of the mechanical and dynamic mechanical tests, the scanning electron micrographs of surface fractures, and the adhesion parameter calculated from the strength models all indicated that there was a strong interfacial interaction between matrix and filler. ? 2005 Society of Chemical Industry Keywords: composites; natural resins; mechanical properties; woodflour; porosity