Advancements in salbutamol sulphate formulation: Spray-drying technique for the production of porous particles with enhanced properties for inhalation drug delivery

SERAIN, MARCOS ANDRÉS; CASTRO-GUIJARRO, ANA CARLA; FLAMINI, MARINA INÉS; BUCALÁ, VERÓNICA; GALLO, LOREANA CAROLINA

DRYING TECHNOLOGY

TAYLOR & FRANCIS INC

Año: 2023 p. 1 - 18

0737-3937

A fast, simple and cost-effective technique has been used to produce spray-drying porous particles of salbutamol sulfate (SS) for inhalation drug delivery. The particles were produced using water as solvent and ammonium bicarbonate as pore-forming agent. A full factorial experimental design (24) with a central point was used to evaluate the influence of process parameters (drying air inlet temperature, atomization air volume flowrate, feed volume flowrate and the pore-forming agent concentration) on process yield, moisture content, densities and particle size. In addition, particle morphology, in-vitro aerosolization properties, stability and cytotoxicity of selected samples were studied. Within the experimental design parameters window, it was shown that the highest inlet temperature and pore-forming agent concentration were the factors that more affected the process yield and tap density values. Particles with the lowest tap densities values exhibited porous morphology. In addition, the pore-forming agent concentration proved to be the most significant variable affecting particle size. The highest pore-forming agent concentration, the largest particle size. The porous particles exhibit remarkable aerosolization performance, surpassing the performance of previously reported SS porous particles and a commercial formulation. These powders showed a high process yield and the absence of ammonium bicarbonate in the final product, as confirmed by FT-IR. Furthermore, the powders presented good stability even over long periods of time and did not exhibit cytotoxicity on the murine alveolar macrophage cell line RAW 264.7.