A PLL-based resampling technique for vibration analysis in variable-speed wind turbines with PMSG: A bearing fault case

PEZZANI, CARLOS M.; BOSSIO, JOSÉ M.; CASTELLINO, ARIEL M.; BOSSIO, GUILLERMO R.; DE ANGELO, CRISTIAN H.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING

ACADEMIC PRESS LTD-ELSEVIER SCIENCE LTD

Año: 2017 vol. 85 p. 354 - 366

0888-3270

Condition monitoring in permanent magnet synchronous machines has gained interest due to the increasing use in applications such as electric traction and power generation. Particularly in wind power generation, non-invasive condition monitoring techniques are of great importance. Usually, in such applications the access to the generator is complex and costly, while unexpected breakdowns results in high repair costs. This paper presents a technique which allows using vibration analysis for bearing fault detection in permanent magnet synchronous generators used in wind turbines. Given that in wind power applications the generator rotational speed may vary during normal operation, it is necessary to use special sampling techniques to apply spectral analysis of mechanical vibrations. In this work, a resampling technique based on order tracking without measuring the rotor position is proposed. To synchronize sampling with rotor position, an estimation of the rotor position obtained from the angle of the voltage vector is proposed. This angle is obtained from a phase-locked loop synchronized with the generator voltages. The proposed strategy is validated by laboratory experimental results obtained from a permanent magnet synchronous generator. Results with single point defects in the outer race of a bearing under variable speed and load conditions are presented.