INVESTIGADORES
URRETAVIZCAYA Guillermina
congresos y reuniones científicas
Título:
Temperature and pressure cycling of magnesium hydride with additives
Autor/es:
G. URRETAVIZCAYA; V. FUSTER; F. CASTRO
Lugar:
Islandia
Reunión:
Simposio; International Symposium on Metal-Hydrogen Systems: Fundamentals and Applications; 2008
Institución organizadora:
Resumen:
MgH2-based materials with graphite and boron nitride as additives have been synthesized
by reactive mechanical alloying (RMA) Mg under hydrogen atmosphere. The additives
were incorporated from the beginning or after MgH2 formation, in this last case by
milling 5 additional hours.
We report here the effect on the synthesized materials of temperature and pressure
cycling under hydrogen atmosphere. The thermal cycling behavior was studied by highpressure
differential scanning calorimetry (HPDSC), the isothermal pressure cycling was
characterized by pressure programmed absorption and desorption (PPAD) [1].
Although the milled samples dont require activation, changes during the first ten cycles
are observed. The influence of the measurement conditions on this evolution is explored,
and the effect of the additives is analyzed.
milling 5 additional hours.
We report here the effect on the synthesized materials of temperature and pressure
cycling under hydrogen atmosphere. The thermal cycling behavior was studied by highpressure
differential scanning calorimetry (HPDSC), the isothermal pressure cycling was
characterized by pressure programmed absorption and desorption (PPAD) [1].
Although the milled samples dont require activation, changes during the first ten cycles
are observed. The influence of the measurement conditions on this evolution is explored,
and the effect of the additives is analyzed.
milling 5 additional hours.
We report here the effect on the synthesized materials of temperature and pressure
cycling under hydrogen atmosphere. The thermal cycling behavior was studied by highpressure
differential scanning calorimetry (HPDSC), the isothermal pressure cycling was
characterized by pressure programmed absorption and desorption (PPAD) [1].
Although the milled samples dont require activation, changes during the first ten cycles
are observed. The influence of the measurement conditions on this evolution is explored,
and the effect of the additives is analyzed.
milling 5 additional hours.
We report here the effect on the synthesized materials of temperature and pressure
cycling under hydrogen atmosphere. The thermal cycling behavior was studied by highpressure
differential scanning calorimetry (HPDSC), the isothermal pressure cycling was
characterized by pressure programmed absorption and desorption (PPAD) [1].
Although the milled samples dont require activation, changes during the first ten cycles
are observed. The influence of the measurement conditions on this evolution is explored,
and the effect of the additives is analyzed.
by reactive mechanical alloying (RMA) Mg under hydrogen atmosphere. The additives
were incorporated from the beginning or after MgH2 formation, in this last case by
milling 5 additional hours.
We report here the effect on the synthesized materials of temperature and pressure
cycling under hydrogen atmosphere. The thermal cycling behavior was studied by highpressure
differential scanning calorimetry (HPDSC), the isothermal pressure cycling was
characterized by pressure programmed absorption and desorption (PPAD) [1].
Although the milled samples dont require activation, changes during the first ten cycles
are observed. The influence of the measurement conditions on this evolution is explored,
and the effect of the additives is analyzed.
milling 5 additional hours.
We report here the effect on the synthesized materials of temperature and pressure
cycling under hydrogen atmosphere. The thermal cycling behavior was studied by highpressure
differential scanning calorimetry (HPDSC), the isothermal pressure cycling was
characterized by pressure programmed absorption and desorption (PPAD) [1].
Although the milled samples dont require activation, changes during the first ten cycles
are observed. The influence of the measurement conditions on this evolution is explored,
and the effect of the additives is analyzed.
milling 5 additional hours.
We report here the effect on the synthesized materials of temperature and pressure
cycling under hydrogen atmosphere. The thermal cycling behavior was studied by highpressure
differential scanning calorimetry (HPDSC), the isothermal pressure cycling was
characterized by pressure programmed absorption and desorption (PPAD) [1].
Although the milled samples dont require activation, changes during the first ten cycles
are observed. The influence of the measurement conditions on this evolution is explored,
and the effect of the additives is analyzed.
milling 5 additional hours.
We report here the effect on the synthesized materials of temperature and pressure
cycling under hydrogen atmosphere. The thermal cycling behavior was studied by highpressure
differential scanning calorimetry (HPDSC), the isothermal pressure cycling was
characterized by pressure programmed absorption and desorption (PPAD) [1].
Although the milled samples dont require activation, changes during the first ten cycles
are observed. The influence of the measurement conditions on this evolution is explored,
and the effect of the additives is analyzed.
by reactive mechanical alloying (RMA) Mg under hydrogen atmosphere. The additives
were incorporated from the beginning or after MgH2 formation, in this last case by
milling 5 additional hours.
We report here the effect on the synthesized materials of temperature and pressure
cycling under hydrogen atmosphere. The thermal cycling behavior was studied by highpressure
differential scanning calorimetry (HPDSC), the isothermal pressure cycling was
characterized by pressure programmed absorption and desorption (PPAD) [1].
Although the milled samples dont require activation, changes during the first ten cycles
are observed. The influence of the measurement conditions on this evolution is explored,
and the effect of the additives is analyzed.
milling 5 additional hours.
We report here the effect on the synthesized materials of temperature and pressure
cycling under hydrogen atmosphere. The thermal cycling behavior was studied by highpressure
differential scanning calorimetry (HPDSC), the isothermal pressure cycling was
characterized by pressure programmed absorption and desorption (PPAD) [1].
Although the milled samples dont require activation, changes during the first ten cycles
are observed. The influence of the measurement conditions on this evolution is explored,
and the effect of the additives is analyzed.
milling 5 additional hours.
We report here the effect on the synthesized materials of temperature and pressure
cycling under hydrogen atmosphere. The thermal cycling behavior was studied by highpressure
differential scanning calorimetry (HPDSC), the isothermal pressure cycling was
characterized by pressure programmed absorption and desorption (PPAD) [1].
Although the milled samples dont require activation, changes during the first ten cycles
are observed. The influence of the measurement conditions on this evolution is explored,
and the effect of the additives is analyzed.
milling 5 additional hours.
We report here the effect on the synthesized materials of temperature and pressure
cycling under hydrogen atmosphere. The thermal cycling behavior was studied by highpressure
differential scanning calorimetry (HPDSC), the isothermal pressure cycling was
characterized by pressure programmed absorption and desorption (PPAD) [1].
Although the milled samples dont require activation, changes during the first ten cycles
are observed. The influence of the measurement conditions on this evolution is explored,
and the effect of the additives is analyzed.
by reactive mechanical alloying (RMA) Mg under hydrogen atmosphere. The additives
were incorporated from the beginning or after MgH2 formation, in this last case by
milling 5 additional hours.
We report here the effect on the synthesized materials of temperature and pressure
cycling under hydrogen atmosphere. The thermal cycling behavior was studied by highpressure
differential scanning calorimetry (HPDSC), the isothermal pressure cycling was
characterized by pressure programmed absorption and desorption (PPAD) [1].
Although the milled samples dont require activation, changes during the first ten cycles
are observed. The influence of the measurement conditions on this evolution is explored,
and the effect of the additives is analyzed.
milling 5 additional hours.
We report here the effect on the synthesized materials of temperature and pressure
cycling under hydrogen atmosphere. The thermal cycling behavior was studied by highpressure
differential scanning calorimetry (HPDSC), the isothermal pressure cycling was
characterized by pressure programmed absorption and desorption (PPAD) [1].
Although the milled samples dont require activation, changes during the first ten cycles
are observed. The influence of the measurement conditions on this evolution is explored,
and the effect of the additives is analyzed.
milling 5 additional hours.
We report here the effect on the synthesized materials of temperature and pressure
cycling under hydrogen atmosphere. The thermal cycling behavior was studied by highpressure
differential scanning calorimetry (HPDSC), the isothermal pressure cycling was
characterized by pressure programmed absorption and desorption (PPAD) [1].
Although the milled samples dont require activation, changes during the first ten cycles
are observed. The influence of the measurement conditions on this evolution is explored,
and the effect of the additives is analyzed.
milling 5 additional hours.
We report here the effect on the synthesized materials of temperature and pressure
cycling under hydrogen atmosphere. The thermal cycling behavior was studied by highpressure
differential scanning calorimetry (HPDSC), the isothermal pressure cycling was
characterized by pressure programmed absorption and desorption (PPAD) [1].
Although the milled samples dont require activation, changes during the first ten cycles
are observed. The influence of the measurement conditions on this evolution is explored,
and the effect of the additives is analyzed.
2-based materials with graphite and boron nitride as additives have been synthesized
by reactive mechanical alloying (RMA) Mg under hydrogen atmosphere. The additives
were incorporated from the beginning or after MgH2 formation, in this last case by
milling 5 additional hours.
We report here the effect on the synthesized materials of temperature and pressure
cycling under hydrogen atmosphere. The thermal cycling behavior was studied by highpressure
differential scanning calorimetry (HPDSC), the isothermal pressure cycling was
characterized by pressure programmed absorption and desorption (PPAD) [1].
Although the milled samples dont require activation, changes during the first ten cycles
are observed. The influence of the measurement conditions on this evolution is explored,
and the effect of the additives is analyzed.
milling 5 additional hours.
We report here the effect on the synthesized materials of temperature and pressure
cycling under hydrogen atmosphere. The thermal cycling behavior was studied by highpressure
differential scanning calorimetry (HPDSC), the isothermal pressure cycling was
characterized by pressure programmed absorption and desorption (PPAD) [1].
Although the milled samples dont require activation, changes during the first ten cycles
are observed. The influence of the measurement conditions on this evolution is explored,
and the effect of the additives is analyzed.
milling 5 additional hours.
We report here the effect on the synthesized materials of temperature and pressure
cycling under hydrogen atmosphere. The thermal cycling behavior was studied by highpressure
differential scanning calorimetry (HPDSC), the isothermal pressure cycling was
characterized by pressure programmed absorption and desorption (PPAD) [1].
Although the milled samples dont require activation, changes during the first ten cycles
are observed. The influence of the measurement conditions on this evolution is explored,
and the effect of the additives is analyzed.
milling 5 additional hours.
We report here the effect on the synthesized materials of temperature and pressure
cycling under hydrogen atmosphere. The thermal cycling behavior was studied by highpressure
differential scanning calorimetry (HPDSC), the isothermal pressure cycling was
characterized by pressure programmed absorption and desorption (PPAD) [1].
Although the milled samples dont require activation, changes during the first ten cycles
are observed. The influence of the measurement conditions on this evolution is explored,
and the effect of the additives is analyzed.
2 formation, in this last case by
milling 5 additional hours.
We report here the effect on the synthesized materials of temperature and pressure
cycling under hydrogen atmosphere. The thermal cycling behavior was studied by highpressure
differential scanning calorimetry (HPDSC), the isothermal pressure cycling was
characterized by pressure programmed absorption and desorption (PPAD) [1].
Although the milled samples dont require activation, changes during the first ten cycles
are observed. The influence of the measurement conditions on this evolution is explored,
and the effect of the additives is analyzed.
References
1. G. Urretavizcaya, V. Fuster and F.J. Castro, Rev. Sci. Instr.76, 073902 (2005).