A chlorination process applied to the recovery of aluminum and SiC reinforcement from an aluminum-matrix composite

HORACIO E.P. NASSINI; ANA ESTER BOHÉ

San Diego, California, USA. Aug. 27-31, 2006

Simposio; SOHN INTERNATIONAL SYMPOSIUM ON ADVANCED PROCESSING OF METALS AND MATERIALS: PRINCIPLES, TECHNOLOGIES AND INDUSTRIAL PRACTICE; 2006

kONGOLI- TMS

Chlorination process is an attractive and efficient method for the metal recovery from complex materials. The process that is performed at high temperatures, allows converting all the metals contained in the material into their respective chlorides which are further separated in a selective way. Aluminum metal matrix composites with discontinuous ceramic reinforcement of short fibers, whiskers, and particles have been gaining wide acceptance as an important engineering material in automotive, aerospace, and electronic industries. Since the ceramic reinforcements are still quite expensive and contribute significantly to the final cost of composite materials, the feasibility of their recovery from the manufacturing scrap and further recycling is a factor of increasing economic interest. In the present work, a theoretical and experimental study is given for the recovery of Al2O3 and SiC particles and short fibers from three commercially available aluminum-matrix composites produced by molten metal mixing route. The process consists of transforming the constituents of metallic alloy matrices in gaseous chlorides that are dragged by the gaseous stream, while the ceramic reinforcement remains as a solid residue in the reaction bed.