CO 2 reactivity with Mg 2 NiH 4 synthesized by in situ monitoring of mechanical milling

GRASSO, M. L.; PUSZKIEL, J.; GENNARI, F. C.; SANTORU, A.; DORNHEIM, M.; PISTIDDA, C.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS

ROYAL SOC CHEMISTRY

Año: 2020 vol. 22 p. 1944 - 1952

1463-9076

CO2 capture and conversion are a key research field for the transition towards an economy only based on renewable energy sources. In this regard, hydride materials are a potential option for CO2 methanation since they can provide hydrogen and act as a catalytic species. In this work, Mg2NiH4 complex hydride is synthesized by in situ monitoring of mechanical milling under a hydrogen atmosphere from a 2MgH2:Ni stoichiometric mixture. Temperature and pressure evolution is monitored, and the material is characterized, during millingin situ, thus providing a good insight into the synthesis process. The cubic polymorph of Mg2NiH4 (S.G. Fm%3m) starts to be formed in the early beginning of the mechanical treatment due to the mechanical stress induced by the milling process. Then, after 25 hours of milling, Mg2NiH4 with a monoclinic (S.G. C12/c1) structure appears. The formation of the monoclinic polymorph is most likely related to the stress release that follows the continuous refinement of the material?s microstructure. At the end of the milling process, after 60 hours, the as-milled material is composed of 90.8 wt% cubic Mg2NiH4, 5.7 wt% monoclinic Mg2NiH4, and 3.5 wt% remnant Ni. The as-milled Mg2NiH4 shows high reactivity for CO2 conversion into CH4. Under static conditions at 400 1C for 5 hours, the interactions between as-milled Mg2NiH4 and CO2 result in totalCO2 consumption and in the formation of the catalytic system Ni?MgNi2?Mg2Ni/MgO. Experimental evidence and thermodynamic equilibrium calculations suggest that the global methanation mechanism takes place through the adsorption of C and the direct solid gasification towards CH4 formation.