BATCH AND DYNAMIC SORPTION OF NI(II) IONS BY ACTIVATED CARBON BASED ON A NATIVE LIGNOCELLULOSIC PRECURSOR

D. NABARLATZ; J. DE CELIS; P. BONELLI; A. L. CUKIERMAN

JOURNAL OF ENVIRONMENTAL MANAGEMENT

ACADEMIC PRESS LTD-ELSEVIER SCIENCE LTD

Lugar: Amsterdam; Año: 2012 vol. 97 p. 109 - 115

0301-4797

Vinal-derived Activated Carbon (VAC) developed by phosphoric acid activation of sawdust from Prosopis ruscifolia native wood was tested for the adsorption of Ni(II) ions from dilute solutions in both batch and dynamic modes, comparing it with a Commercial Activated Carbon (CAC). Batch experiments were performed to determine adsorption kinetics and equilibrium isotherms for both carbons. It was possible to remove near 6.55 mg Ni g
1 VAC and 7.65 mg Ni g
1 CAC after 5 h and 10 h contact time, respectively. A pseudo second order equation fitted well with the kinetics of the process, and Langmuir adsorption model was used to adjust the experimental results concerning the adsorption isotherm. The parameters       obtained indicate a stronger interaction between sorbent and sorbate for VAC (K ¼ 26.56 L mmol/1) than for CAC (K ¼ 19.54 L mmol
1). Continuous experiments were performed in a fixed-bed column packed with the investigated carbons, evaluating the influence of operational parameters such as flow rate, bed height and feed concentration on the breakthrough curves obtained. The breakthrough occurred more slowly for low concentrations of the metal ion in the feed, low flow rates and high bed height. The breakthrough curves were properly represented by Hall?s model for both carbon types. Regeneration ofthe vinal activated carbon in column was tested, obtaining the same breakthrough curve in a new cycle ofuse. Finally, vinal-derived activated carbon can effectively be used to treat wastewater having until 30 ppm Ni(II).