INVESTIGADORES
DOMMARCO Ricardo
artículos
DELFIN, F.; BRUHL, S. P.; DOMMARCO, R. C.; FORSICH, CH; HEIM, D.
Impact of relative humidity and deposition parameters on the tribological behavior of soft DLC coatings
SURFACE AND COATINGS TECHNOLOGY; Lugar: Amsterdam; Año: 2023 vol. 474
PEPE, ALFONSO; TITO, FLORENCIA; MANDRI, A. D.; DOMMARCO, R. C.; PEPE, A.
Green corrosion inhibitor for mild steel extracted from soybean leaves
CHEMICAL ENGINEERING COMMUNICATIONS; Lugar: Londres; Año: 2023 vol. 211 p. 697 - 706
MANDRI, A. D.; COLOMBO, DIEGO A.; BRUHL, S. P.; DOMMARCO, R. C.
Sliding friction and wear behavior of ion nitrided and TiN coated AISI 4140 steel
Tribology - Materials, Surfaces & Interfaces; Lugar: London; Año: 2022 vol. 16 p. 373 - 383
COLOMBO, DIEGO A.; QUINTANA, J. P.; MANDRI, A. D.; MARQUEZ, A. B.; DOMMARCO, R. C.
Sliding wear performance of TiAl-based nitride coatings deposited on ADI by cathodic arc deposition and plasma based ion implantation and deposition
Tribology - Materials, Surfaces & Interfaces; Lugar: London; Año: 2022
PEDRO, D.I.; MANDRI, A.D.; DOMMARCO, R.C.
Optimization of the rolling contact fatigue (RCF) performance of carbidic austempered ductile iron (CADI)
TRIBOLOGY INTERNATIONAL; Año: 2020 vol. 143
PRIETO, G.; MANDRI, A.; TUCKART, W. R.; RABBIA, G.; DOMMARCO, R.
Rolling Contact Fatigue Resistance of Cryogenically Treated AISI 440C Steel
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE; Lugar: Berlin; Año: 2020 vol. 29 p. 2216 - 2226
COLOMBO, DIEGO A.; DOMMARCO, RICARDO C.; BASSO, ALEJANDRO D.
Rolling contact fatigue behavior of dual-phase austempered ductile iron
WEAR; Año: 2019 vol. 418 p. 208 - 214
PEDRO, D I; DOMMARCO, R C
Rolling contact fatigue resistance of Carbidic Austempered Ductile Iron (CADI)
WEAR; Año: 2019
COLOMBO, DIEGO A.; MANDRI, ALEJO D.; ECHEVERRÍA, MARÍA D.; MASSONE, JUAN M.; DOMMARCO, RICARDO C.
Mechanical and tribological behavior of Ti/TiN and TiAl/TiAlN coated austempered ductile iron
THIN SOLID FILMS; Año: 2018 vol. 647 p. 19 - 25
PEDRO, DIEGO IVÁN; LAINO, SEBASTIÁN; DOMMARCO, RICARDO CESAR
Study of the Carbidic ADI performance under RCF condition
REVISTA MATéRIA; Año: 2018 vol. 23
MANDRI, ALEJO DANIEL; LAINO, SEBASTIÁN; DOMMARCO, RICARDO CÉSAR
Rolling contact fatigue of quenched TiN coated SAE 1050 steel Fatiga de contacto por rodadura en acero SAE 1050 recubierto con TiN, posteriormente templado
REVISTA MATéRIA; Lugar: Río de Janeiro; Año: 2018 vol. 23
COLOMBO, DIEGO; ECHEVERRÍA, MARÍA; DOMMARCO, R. C.; MASSONE, J.
Influence of TiN coating thickness on the rolling contact fatigue resistance of austempered ductile iron
WEAR; Lugar: Amsterdam; Año: 2016 p. 82 - 88
COLOMBO, DIEGO; ECHEVERRÍA, MARÍA; LAINO, S.; DOMMARCO, R. C.; MASSONE, J.
Sliding wear behavior of PVD CrN and TiN coated austempered ductile iron
ISIJ INTERNATIONAL; Lugar: Tokio; Año: 2014 vol. 54 p. 2860 - 2867
MAYRA LAGARDE; ARIEL DE PAZ; MARIELA DEL GROSSO; DIANA FASCE; DOMMARCO, RICARDO C.; LAINO, S.; FASCE, L.
On the comparison of changes induced in crystallinity and surface nanomechanical properties of ultra high molecular weigth polyetylene by gamma and swift heavy ion irradiations
SURFACE AND COATINGS TECHNOLOGY; Lugar: Amsterdam; Año: 2014
COLOMBO, DIEGO; ECHEVERRÍA, MARÍA; LAINO, S.; DOMMARCO, R. C.; MASSONE, J.
Rolling contact fatigue resistance of PVD CrN and TiN coated austempered ductile iron
WEAR; Lugar: Amsterdam; Año: 2013 vol. 308 p. 35 - 454
BASSO, A.; LAINO, S.; DOMMARCO, R. C.
Wear Behavior of Carbidic Ductile Iron with Different Matrices and Carbide Distribution
TRIBOLOGY TRANSACTIONS; Lugar: Londres; Año: 2013 vol. 56 p. 33 - 40
J. DE BONA; LAINO, S.; VALERIA PETTARIN; E. BROITMAN; DOMMARCO, R. C.; PATRICIA FRONTINI
Differences in the sliding wear track patterns between UHMWPE/steel and UHMWPE/CNx pairs
Procedia Materials Science; Lugar: Philidelphia PA 19103-2879 USA ; Año: 2012 vol. 1 p. 329 - 336
LAGARDE, M.; BASSO, A.; DOMMARCO, R. C.; SIKORA, J. A.
Development and characterization of a new type of ductile iron with multi-phase microstructures
ISIJ INTERNATIONAL; Año: 2011 vol. 51 p. 645 - 650
LAINO, S.; SIKORA, J. A.; DOMMARCO, R. C.
Advances in the Development of Carbidic ADI
KEY ENGINEERING MATERIALS; Año: 2011 vol. 457 p. 187 - 192
SEBASTIÁN LAINO; JORGE A. SIKORA; RICARDO C. DOMMARCO
Wear Behavior of CADI Operating Under Different Tribosystems
ISIJ INTERNATIONAL; Lugar: Tokio; Año: 2010 vol. 50 p. 418 - 424
LAINO, S.; SIKORA, J. A.; DOMMARCO, R. C.
Influence of chemical compostion and solidification rate on the abrasion and impact properties of CADI
ISIJ INTERNATIONAL; Lugar: Tokio; Año: 2009 vol. 49 p. 1239 - 1245
SEBASTIÁN LAINO; HUGO R. ORTÍZ; RICARDO C. DOMMARCO
The Influence of Austempering Temperature on the Wear Resistance of Ductile Iron under Two Different Tribosystems
ISIJ INTERNATIONAL; Lugar: Tokio; Año: 2009 vol. 49 p. 132 - 138
GASTÓN FRANCUCCI; JORGE A. SIKORA; RICARDO C. DOMMARCO
Abrasion Resistance of Ductile Iron Austempered by the Two-Step Process
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING; Año: 2008 vol. 485 p. 46 - 54
SEBASTIÁN LAINO; JORGE A. SIKORA; RICARDO C. DOMMARCO
Development of Wear Resistant Carbidic Austempered Ductile Iron (CADI)
WEAR; Lugar: Amsterdam; Año: 2008 vol. 265 p. 1 - 7
JESSICA V. GIACCHI; RICARDO A. MARTINEZ; MATIAS R. MARTINEZ GAMBA; RICARDO C. DOMMARCO
Abrasion and Impact Properties of Partially Chilled Gray Iron
WEAR; Lugar: Amsterdam; Año: 2007 vol. 262 p. 282 - 291
RICARDO C. DOMMARCO; ADRIÁN JAUREGUIBERRY; JORGE A. SIKORA
Rolling Contact Fatigue Resistance of Ductile Iron With Different Nodule Counts and Matrix Microstructures
WEAR; Lugar: Amsterdam; Año: 2006 vol. 261 p. 172 - 179
RICARDO C. DOMMARCO; PEDRO C. BASTIAS; CAROL RUBIN; GEORGE T. HAHN
The Influence of Material Build-Up Around Artificial Defects on Rolling Contact Fatigue Life and Failure Mechanism
WEAR; Año: 2006 vol. 260 p. 1317 - 1323
CECCARELLI, B. A.; DOMMARCO, R. C.; MARTINEZ, R. A.; MARTINEZ GAMBA, M. R.
Abrasion and impact properties of partially chilled ductile iron
WEAR; Lugar: Amsterdam; Año: 2004 vol. 256 p. 49 - 55
DOMMARCO, RICARDO C.; SOUSA, M. E.; SIKORA, J. A.
Abrason resistance of high nodule count ductile iron
WEAR; Lugar: Amsterdam; Año: 2004 vol. 257 p. 1185 - 1192
DOMMARCO, RICARDO C.; KOZACZEK, K. J.; BASTIAS, P. C.; HAHN, G. T.; RUBIN, C. A.
Residual stresses and retained austenite evolution in SAE 52100 steel under non-ideal rolling contact loading
WEAR; Lugar: Amsterdam; Año: 2004 vol. 257 p. 1081 - 1088
DOMMARCO, R. C.; SALVANDE, J. D.
Contact fatigue resistance of austempered and partially chilled ductile irons
WEAR; Año: 2003 vol. 254 p. 230 - 236
REBASA, N.; DOMMARCO, R. C.; SIKORA, J. A.
Wear resistance of high nodule count ductile iron
WEAR; Año: 2002 vol. 253 p. 855 - 861
DOMMARCO, R. C.; BASTIAS, P. C.; HAHN, G. T.; RUBIN, C. A.
The use of artificial defects in the 5-ball-rod rolling contact fatigue experiments
WEAR; Año: 2002 vol. 252 p. 430 - 437
DOMMARCO, R. C.; GALARRETA, I.; ORTÍZ, H. R.; DAVID, P.; MAGLIERI, G.
The use of ductile iron for wheel loader bucket tips
WEAR; Año: 2001 vol. 249 p. 101 - 108
DOMMARCO, R. C.; BASTIAS, P. C.; DALL´O, H. A.; HAHN, G. T.; RUBIN, C. A.
Rolling Contact Fatigue (RCF) resistance of Austempered Ductile Iron (ADI)
WEAR; Año: 1998 vol. 221 p. 69 - 74
CRUSE, T. A.; DOMMARCO, R. C.; BASTIAS, P. C.
Shear strength of a thermal barrier coating parallel to the bond coat
Journal of Engineering Materials and Technology; Lugar: Nueva York; Año: 1998 vol. 120 p. 26 - 32