NOSEDA GRAU, V.; BUSTOS, I.; YAWNY, A.; PELEGRINA, J. L.

What is Wrong with the Clapeyron Equation in Martensitic Transformations?

Shape Memory and Superelasticity; Año: 2025

BERGANT, MARCOS ANTONIO; SORIA, SERGIO RAÚL; BUSTOS, RAÚL IGNACIO; SOUL, HUGO RAMÓN; YAWNY, ALEJANDRO ANDRÉS

On the Relative Significance of Roughness, Printing Defects and Microstructure on the Fatigue Behavior of Electron Beam Melted Ti‐6Al‐4V

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (PRINT); Año: 2025 p. 1 - 20

DELMASTRO, JUAN; BUSTOS, IGNACIO; ALONSO, GASTÓN; YAWNY, ALEJANDRO

New Insight into the Coefficient of Performance and Related Material Indices of Merit for the Selection of Shape Memory Elastocaloric Materials

Shape Memory and Superelasticity; Año: 2025 p. 1 - 16

SORIA, S.R.; SOUL, H.; BERGANT, M.; YAWNY, A.

Fretting wear behaviour of biomedical grade Ti6Al4V produced by electron beam powder bed fusion

Additive Manufacturing; Año: 2024 vol. 86

BUSTOS, IGNACIO; BERGANT, MARCOS; YAWNY, ALEJANDRO

On the suitability of applying thermographic methods for the rapid estimation of the fatigue limit of additively manufactured Ti-6Al-4V

INTERNATIONAL JOURNAL OF FATIGUE; Año: 2023

ALONSO, M. G.; YAWNY, A.; BERTOLINO, G.

A numerical study towards shape memory alloys application in orthotic management of pediatric knee lateral deviations

Scientific Reports; Año: 2023 vol. 13

SORIA, S.R.; CLARAMONTE, S.; YAWNY, A.

Determination of the fretting maps on Incoloy 800 steam generator tubes against AISI 420 steel

TRIBOLOGY INTERNATIONAL; Año: 2023 p. 1 - 14

BERGANT, MARCOS; LARROSA, NICOLÁS O.; YAWNY, ALEJANDRO; MADIA, MAURO

Short crack growth model for the evaluation of the fatigue strength of WAAM Ti-6Al-4V alloy containing pore-type defects

ENGINEERING FRACTURE MECHANICS; Año: 2023 vol. 289 p. 1 - 21

SORIA, S.R.; CLARAMONTE, S.; NIETO CASTRO, E.A.; ALVAREZ, A.M.; YAWNY, A.

Evolution of fretting induced cracks and delamination wear on alloy 690 steam generator tubes during mixed fretting regime in air at room temperature

TRIBOLOGY TRANSACTIONS; Año: 2023 p. 1 - 17

BUSTOS, IGNACIO; SOUL, HUGO; ALONSO, GASTÓN; BERTOLINO, GRACIELA; YAWNY, ALEJANDRO

Heat Source Reconstruction and Its Relationship with Functional Fatigue of Pseudoelastic NiTi Ribbons

Shape Memory and Superelasticity; Año: 2022

G. ALONSO; A. YAWNY; G. BERTOLINO

How do bones grow? A mathematical description of the mechanobiological behavior of the epiphyseal plate

BIOMECHANICS AND MODELING IN MECHANOBIOLOGY; Lugar: HEIDELBERG; Año: 2022 p. 1 - 17

SORIA, S.R.; CLARAMONTE, S.; YAWNY, A.

Evolution of fretting wear with the number of cycles on Inconel 690 steam generator tubes against AISI 420 steel under gross slip conditions

TRIBOLOGY INTERNATIONAL; Año: 2021 vol. 155

BERGANT, MARCOS; WERNER, TIAGO; MADIA, MAURO; YAWNY, ALEJANDRO; ZERBST, UWE

Short crack propagation analysis and fatigue strength assessment of additively manufactured materials: an application to AISI 316L

INTERNATIONAL JOURNAL OF FATIGUE; Año: 2021

M.G. ALONSO; A. YAWNY; G. BERTOLINO

A tool for solving bone growth related problems using finite elements adaptive meshes

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS; Lugar: Amsterdam; Año: 2021

J. DELMASTRO; A. YAWNY

Creep-fatigue testing machine design and implementation

Revista SAM; Lugar: CABA; Año: 2021 vol. 1 p. 55 - 63

BERGANT, MARCOS A.; YAWNY, ALEJANDRO A.; PEREZ IPIÑA, JUAN E.

Damage tolerant analysis of corner cracks in small nozzle process penetration of the CAREM-25 reactor pressure vessel

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING; Año: 2020 vol. 180 p. 1 - 12

M. BERGANT; A. YAWNY; J.E. PEREZ IPIÑA

A comparison of Failure Assessment Diagram options for Inconel 690 and Incoloy 800 nuclear steam generators tubes

ANNALS OF NUCLEAR ENERGY; Lugar: Amsterdam; Año: 2020 vol. 140 p. 1 - 10

M.G. ALONSO; G. BERTOLINO; A. YAWNY

Mechanobiological based long bone growth model for the design of limb deformities correction devices

JOURNAL OF BIOMECHANICS; Lugar: Amsterdam; Año: 2020 vol. 109

M. BERGANT; A, YAWNY; J.E. PEREZ IPIÑA

Evaluación de la tenacidad a la fractura de los materiales del recipiente de presión del reactor nuclear CAREM-25

Revista SAM; Lugar: CABA; Año: 2020 vol. 1 p. 68 - 75

S. SORIA; C.E. CALLISAYA; H. SOUL; S. CLARAMONTE; A. YAWNY

Fretting damage of Ni-rich ultrafine grained NiTi superelastic wires

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS; Lugar: Amsterdam; Año: 2019 vol. 90 p. 655 - 664

SORIA, S.R.; TOLLEY, A.; YAWNY, A.

Running condition and material response fretting maps of incoloy 800 steam generator tubes against AISI 304L pads in air and room temperature

TRIBOLOGY INTERNATIONAL; Lugar: Amsterdam; Año: 2019 vol. 135 p. 408 - 420

JAUREGUIZAHAR, S.M.; CHAPETTI, M.D.; YAWNY, A.

A novel experimental method to assess the fatigue behavior of pseudoelastic NiTi wires

INTERNATIONAL JOURNAL OF FATIGUE; Año: 2018 vol. 116 p. 300 - 305

PELEGRINA, J.L.; OLBRICHT, J.; YAWNY, A.; EGGELER, G.

Temperature-induced transformations and martensitic reorientation processes in ultra-fine-grained Ni rich pseudoelastic NiTi wires studied by electrical resistance

JOURNAL OF ALLOYS AND COMPOUNDS; Año: 2018 vol. 735 p. 2574 - 2583

A. GLÜCKSBERG; H. SOUL; A. YAWNY

Releasing systems for aerospace industry based upon Shape Memory Alloys: characterization of materials for actuators

REVISTA MATéRIA; Año: 2018 vol. 23 p. 1 - 12

J.L. PELEGRINA; A. YAWNY; M. SADE

Diffusive Phenomena and the Austenite / Martensite Relative Stability in Cu-Based Shape Memory Alloys

Shape Memory and Superelasticity; Año: 2018 vol. 4 p. 48 - 60

SOUL, HUGO; YAWNY, ALEJANDRO

Effect of Variable Amplitude Blocks’ Ordering on the Functional Fatigue of Superelastic NiTi Wires

Shape Memory and Superelasticity; Año: 2017

SOUL, H; YAWNY, ALEJANDRO

Applicability of superelastic materials in seismic protection systems: a parametric study of performance in isolation of structures

SMART MATERIALS & STRUCTURES; Año: 2017 p. 1 - 23

SORIA, S.R.; TOLLEY, A.; YAWNY, A.

Characterization of damage and triboparticles resulting from fretting of Incoloy 800 steam generator tubes against different materials

WEAR; Año: 2017 vol. 390 p. 198 - 208

BERGANT, MARCOS A.; YAWNY, ALEJANDRO A.; PEREZ IPIÑA, JUAN E.

J-resistance curves for Inconel 690 and Incoloy 800 nuclear steam generators tubes at room temperature and at 300 °C

JOURNAL OF NUCLEAR MATERIALS; Año: 2017 vol. 486 p. 298 - 307

G. BERTOLINO; A. YAWNY; J.L. PELEGRINA

The limitations of electrical resistance for accurate positioning of shape-memory actuators: The case of well-oriented CuZnAl single-crystals under uniaxial loading

MATERIALS & DESIGN; Lugar: Amsterdam; Año: 2017 vol. 117 p. 316 - 325

S. SORIA; A. TOLLEY; A. YAWNY

A study of debris and wear damage resulting from fretting of Incoloy 800 steam generator tubes against AISI Type 304 stainless steel

WEAR; Lugar: Amsterdam; Año: 2016 vol. 368 p. 219 - 229

JAUREGUIZAHAR, SEBASTIÁN M.; CHAPETTI, MIRCO D.; YAWNY, ALEJANDRO A.

Fatigue of NiTi shape memory wires

Procedia Structural Integrity; Año: 2016 vol. 2 p. 1427 - 1434

BERGANT, MARCOS A.; YAWNY, ALEJANDRO A.; PEREZ IPIÑA, JUAN E.

Experimental determination of J-resistance curves of nuclear steam generator tubes

ENGINEERING FRACTURE MECHANICS; Año: 2016 vol. 164 p. 1 - 18

MORENO, M.F.; BERTOLINO, G.; YAWNY, A.

The significance of specimen displacement definition on the mechanical properties derived from Small Punch Test

Materials and Design; Año: 2016 vol. 95 p. 623 - 631

J.L. PELEGRINA; A. YAWNY; J. OLBRICHT; G. EGGELER

Transformation activity in ultrafine grained peudoelastic NiTi wires during small amplitude loading/unloading experiments

JOURNAL OF ALLOYS AND COMPOUNDS; Lugar: Amsterdam; Año: 2015 vol. 651 p. 655 - 665

H. SOUL; A. YAWNY

Self-centering and damping capabilities of a tension-compression device equipped with superelastic NiTi wires

SMART MATERIALS & STRUCTURES; Lugar: Londres; Año: 2015 vol. 24 p. 1 - 13

M. BERGANT; A, YAWNY; J. PEREZ IPIÑA

Structural integrity assessments of steam generator tubes using the FAD methodology

NUCLEAR ENGINEERING AND DESIGN; Lugar: Amsterdam; Año: 2015 vol. 295 p. 457 - 467

M. BERGANT; A. YAWNY; J. PEREZ IPIÑA

Numerical study of the applicability of the eta-factor method to J-resistance curve determination of steam generator tubes using non-standard specimens

ENGINEERING FRACTURE MECHANICS; Lugar: Amsterdam; Año: 2015 vol. 146 p. 109 - 120

S. SORIA; J.P. BALBIANI; M. BERGANT; A. TOLLEY; A. YAWNY

Fretting damage in Incoloy® 800 tubes against different support materials

Procedia Materials Science; Año: 2015 vol. 9 p. 538 - 547

M. BERGANT; A. YAWNY; J. E. PEREZ IPIÑA

Failure Assessment Diagram in Structural Integrity Analysis of Steam Generator Tubes

Procedia Materials Science; Año: 2015 vol. 8 p. 128 - 138

J.L. PELEGRINA; A. YAWNY; J. OLBRICHT

Comment on: Isothermal nature of the B2-B19 martensitic transformation in a Ti51.2 Ni (at.%) alloy

SCRIPTA MATERIALIA; Lugar: Amsterdam; Año: 2015 vol. 98 p. 68 - 70

S. JAUREGUIZAHAR; H. SOUL; M. D. CHAPETTI; A. YAWNY

Characterization of Fatigue Life of Ultrafine Grained NiTi Superelastic Wires Under Uniaxial Loading

Procedia Materials Science; Año: 2015 vol. 9 p. 326 - 334

M. SADE; J.L. PELEGRINA; A. YAWNY; F.C. LOVEY

Diffusive phenomena and pseudoelasticity in Cu Al Be single crystals

JOURNAL OF ALLOYS AND COMPOUNDS; Lugar: Amsterdam; Año: 2015 vol. 622 p. 309 - 317

G. CASTELLUCCIO; J. E. PEREZ IPIÑA; A. YAWNY; H. ERNST

Fracture testing of the heat affected zone from welded steel pipes using an in situ stage.

ENGINEERING FRACTURE MECHANICS; Lugar: Oxford; Año: 2013

H. SOUL; A. YAWNY

Thermomechanical model for evaluation of the superelastic response of NiTi shape memory alloys under dynamic conditions

SMART MATERIALS & STRUCTURES; Lugar: Londres; Año: 2013 vol. 22

J. OLBRICHT; A. YAWNY; J.L. PELEGRINA; G. EGGELER; V. A. YARDLEY

Characteristics of the stress-induced formation of R-phase in ultrafine-grained NiTi shape memory wire

JOURNAL OF ALLOYS AND COMPOUNDS; Lugar: Amsterdam; Año: 2013 vol. 579 p. 249 - 252

F. DE CASTRO BUBANI; M. SADE; V. TORRA; F. LOVEY; A. YAWNY

Stress Induced Martensitic Transformations and Phases Stability in Cu-Al-Be Shape- Memory Single Crystals

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING; Lugar: Amsterdam; Año: 2013 vol. 583 p. 129 - 139

M. BERGANT; A. YAWNY; J. PEREZ IPIÑA

Estimation procedure of J-resistance curves for through wall cracked steam generator tubes

Procedia Materials Science; Año: 2012 vol. 1 p. 273 - 280

H. SOUL; A. YAWNY

Superelastic behaviour of NiTi wires under general cycling conditions: Thermomechanic 1-D modelling

Procedia Materials Science; Año: 2012 vol. 1 p. 141 - 148

M.T. MALACHEVSKY; M. C. MATHEVON; A. YAWNY; C. D´OVIDIO

Submicrometre ceramic particles addition in AlSi6Cu4 foams

CANADIAN METALLURGICAL QUARTERLY; Año: 2012 vol. 51 p. 456 - 461

G. CASTELLUCCIO; A. YAWNY; J. E. PEREZ IPIÑA; H. ERNST

In Situ Evaluation of Tensile Properties of Heat-Affected Zones From Welded Steel Pipes

STRAIN; Año: 2012 vol. 48 p. 68 - 74

J. OLBRICHT; A. YAWNY; J.L. PELEGRINA; A. DLOUHY; G. EGGELER

On the Stress Induced Formation of R-phase in Ultra Fine Grained Ni-rich NiTi Shape Memory Alloys

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE; Año: 2011 vol. 42A p. 2556 - 2574

M. SADE; A. YAWNY; F.C. LOVEY; V. TORRA

Pseudoelastic Behavior of Cu-Al-Be Single Crystals: Unexpected Mechanical Behavior

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING; Año: 2011 vol. 528 p. 7871 - 7877

H. SOUL; A. ISALGUE; A. YAWNY; V. TORRA; F.C. LOVEY

Pseudoelastic fatigue of NiTi wires. Frequency and size effects on damping capacity

SMART MATERIALS & STRUCTURES; Año: 2010 vol. 19 p. 111 - 1111

J. OLBRICHT; A. YAWNY; M.L. YOUNG; G. EGGELER

Mechanical and microstructural observations during compression creep of a short fiber reinforced AlMg metal matrix composite

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING; Lugar: Amsterdam, The Netherland; Año: 2009 vol. 510 p. 407 - 412

A. YAWNY; J. OLBRICHT; M. SADE; G. EGGELER

Pseudoelastic cycling and ageing effects at ambient temperature in nanocrystalline Ni rich NiTi wire

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING; Lugar: Amsterdam; Año: 2008 vol. 481 p. 86 - 90

J. OLBRICHT; A. YAWNY; A. CONDÓ; F.C. LOVEY; G. EGGELER

The influence of temperature on the evolution of functional properties during pseudoelastic cycling of ultra fine grained NiTi

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING; Lugar: Amsterdam; Año: 2008 vol. 481 p. 142 - 145

A. CONDÓ; F.C. LOVEY; J. OLBRICHT; CH. SOMSEN; A. YAWNY

Microstructural aspects related to pseudoelastic cycling in ultra fine grained Ni–Ti

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING; Lugar: Amsterdam; Año: 2008 vol. 481 p. 138 - 141

A. ISALGUE; V. TORRA; A. YAWNY; F.C. LOVEY

Metastable Effects on Martensitic Transformation in Shape Memory Alloys Part VI: The Clausius-Clapeyron Relationship

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY; Lugar: Dordrecht, The Netherlands; Año: 2008 vol. 91 p. 991 - 998

G. CASTELLUCCIO; R. BRAVO; H. ERNST; A.YAWNY; J. E. PEREZ IPIÑA

Simple Application of Open Source PIV Technique for Measuring Displacements and Strains

MECANICA COMPUTACIONAL; Año: 2008 vol. 27 p. 1193 - 1203

M. SADE; C. DAMIANI; R. GASTIEN; F.C. LOVEY; J. MALARRÍA; A. YAWNY

Fatigue and martensitic transitions in Cu–Zn–Al and Cu–Al–Ni single crystals: mechanical behaviour, defects and diffusive phenomena

SMART MATERIALS AND STRUCTURES; Lugar: Bristol; Año: 2007 vol. 16 p. 126 - 136

HUGO SOUL; ALEJANDRO YAWNY; FRANCISCO C. LOVEY; VICENTE TORRA

Thermal Effects in a Mechanical Model for Pseudoelastic Behaviour of NiTi wires

MATERIALS RESEARCH; Lugar: Sao Carlos SP, Brasil; Año: 2007 vol. 10 p. 387 - 394

J. MICHUTTA; CH. SOMSEN; A. YAWNY; A. DLOUHY; G. EGGELER

Elementary martensitic transformation processes in Ni-rich NiTi single crystals with Ni4Ti3 precipitates

ACTA MATERIALIA; Lugar: Amsterdam, The Netherlands; Año: 2006 vol. 54 p. 3525 - 3542

A. YAWNY; M. SADE; G. EGGELER

Pseudoelastic cycling of ultra-fine-grained NiTi shape-memory-wires

ZEITSCHRIFT FUR METALLKUNDE; Lugar: München; Año: 2005 vol. 96 p. 608 - 618

F. MARTORELL; A. ISALGUE; F.C. LOVEY; A. YAWNY; V. TORRA

Physical constraints in SMA applications. One study case: dampers in Civil Engineering

SPIE; Lugar: Bellingham, WA ; Año: 2005 vol. 5648 p. 194 - 207

J, MICHUTTA; A. YAWNY; M.C. CAROLL; CH. SOMSEN; G. EGGELER

Influence of compression aging on phase transition temperatures in single crystalline Ni-rich shape memory alloys

MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK; Lugar: Weinheim; Año: 2004 vol. 35 p. 289 - 293

A. YAWNY; G. EGGELER

Assessment of back stress and load transfer approaches for rationalizing creep of short fiber reinforced aluminum alloys

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING; Lugar: Amsterdam; Año: 2004 vol. 387 p. 905 - 909

J. SCHÜRHOFF; A. YAWNY; B. SKROTZKI; G. EGGELER

Fibre breakage in short fibre reinforced metal matrix composites during creep and constant strain rate compression testing

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING; Año: 2004 vol. 387 p. 896 - 899

G. EGGELER; E. HORNBOGEN; A. YAWNY; A. HECKMANN; M. WAGNER

Structural and functional fatigue of NiTi shape memory alloys

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING; Lugar: Amsterdam; Año: 2004 vol. 378 p. 24 - 33

J, MICHUTTA; M.C. CAROLL; A. YAWNY; CH. SOMSEN; K. NEUKING; G. EGGELER

Martensitic phase transformation in Ni-rich NiTi single crystals with one family of Ni4Ti3 precipitates

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING; Año: 2004 vol. 378 p. 152 - 156

J.E. PEREZ IPINA; A. YAWNY; C. GONZÁLEZ OLIVER

On the Applicability of Elastic-plastic Fracture Mechanics to Discontinuously Reinforced Aluminum Composites

JOURNAL OF COMPOSITE MATERIALS; Año: 2003 vol. 37 p. 2001 - 2010

T. SAWAGUCHI; G. KAUSTRÄTER; A. YAWNY; M. WAGNER; G. EGGELER

Crack Initiation and Propagation in 50.9at.% Ni-Ti Pseudoelastic Shape memory Wires in Bending-Rotation Fatigue

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE; Año: 2003 vol. 34A p. 2847 - 2860

A. YAWNY; J. E. PEREZ IPIÑA

In Situ Fracture Toughness Measurement using Scanning Electron Microscopy

JOURNAL OF TESTING AND EVALUATION; Lugar: West Conshohocken, PA, USA; Año: 2003 vol. 31 p. 1 - 11

M. SADE; A. YAWNY; F.C. LOVEY; C. DAMIANI

Pseudoelasic fatigue and diffusive phenomena in Cu-Zn-Al single crystals

JOURNAL DE PHYSIQUE IV; Lugar: Les Ulis; Año: 2003 vol. 112 p. 483 - 486

A. YAWNY; G. KAUSTRÄTER; B. SKROTZKI; G. EGGELER

On the influence of fibre texture on the compression creep behaviour of a short fibre reinforced aluminium alloy

SCRIPTA MATERIALIA; Lugar: Amsterdam, The Netherland; Año: 2002 vol. 46 p. 837 - 842

M. CASTRODEZA; A. YAWNY; J. E. PEREZ IPIÑA; F. BASTIAN

Fracture Micromechanisms of Fibre-Metal Laminates In-Situ SEM Observations

JOURNAL OF COMPOSITE MATERIALS; Año: 2002 vol. 36 p. 387 - 400

A. YAWNY; F.C. LOVEY; M. SADE

Pseudoelastic fatigue of Cu-Zn-Al single crystals: the effect of concomitant diffussional processes

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING; Lugar: Amsterdam, The Netherland; Año: 2000 vol. 290 p. 108 - 121

J. E. PEREZ IPIÑA; A. YAWNY; R. STUKE; C. GONZÁLEZ OLIVER

Fracture Toughness in Metal Matrix Composites

MATERIALS RESEARCH; Año: 2000 vol. 3 p. 74 - 78

A. YAWNY; M. SADE; F.C. LOVEY

Conceptual design of actuator applications with Cu-Zn-Al single crystals

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING; Año: 1999 vol. 273 p. 600 - 604

A. YAWNY; J. MALARRÍA; E. SOUKUP; M. SADE

Stage for in situ mechanical loading experiments in a scanning electron microscope (Philips 515) with a small chamber

REVIEW OF SCIENTIFIC INSTRUMENTS; Año: 1997 vol. 68 p. 150 - 154

P. ARNEODO LAROCHETTE; E. CINGOLANI; A. YAWNY; M.AHLERS

The Two Way Shape Memory Effect in Stabilized Cu-Zn-Al Single and Polycrystals

JOURNAL DE PHYSIQUE IV; Año: 1997 vol. 07 p. 495 - 500

A. YAWNY; F.C. LOVEY; M. SADE; J. MALARRÍA

Recoverable Effects Related to Pseudoelastic Cycling in Cu-Zn-Al Single Crystals

JOURNAL DE PHYSIQUE IV; Año: 1997 p. 531 - 536

A. YAWNY; M. SADE; F.C. LOVEY

Actuator Applications with Single Crystals of Cu-Zn-Al Shape Memory Alloys

MRS Symposium Proceedings; Lugar: Pittsburgh; Año: 1997 vol. 459 p. 369 - 374

A. YAWNY; M. SADE; F.C. LOVEY

Actuator applications with single-crystals of Cu-Zn-Al shape memory alloys

Journal of the Argentine Chemical Society; Año: 1996 vol. 84 p. 375 - 379

A. YAWNY; J. MALARRÍA; E. SOUKUP; C. COTARO; S. DUTRUS; M.SADE

In-situ tensile induced martensitic transformations in a SEM Philips 515 with small chamber

ACTA MICROSCOPICA; Año: 1996 vol. 4 p. 123 - 123

A. YAWNY; F.C. LOVEY; V. TORRA

Entropy Production in Single-Crystal Single-Interface Martensitic Transformations

SCRIPTA METALLURGICA ET MATERIALIA; Año: 1995 vol. 32 p. 439 - 444

E. CINGOLANI; A. YAWNY; M. AHLERS

The two way shape memory effect in stabilized and pseudoelastically trained Cu-Zn-Al single crystals

JOURNAL DE PHYSIQUE IV; Año: 1995 vol. 5 p. 865 - 875

J.C. BOLCICH; A. YAWNY; H. CORSO; H. PERETTI; C.O.AYALA

Hydrogen storage employing Mg-10wt%Ni alloy

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY; Año: 1993 vol. 19 p. 605 - 609

A. YAWNY; G. FRIEDELMEIER; J.C. BOLCIH

Hydrides for hydrogen - deuterium separation

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY; Año: 1989 vol. 14 p. 587 - 597