DE BARBIERI, FLAVIO; JORGE-BADIOLA, DENIS; ALLENDE, RODRIGO; TELLO, KAREM; ARTIGAS, ALFREDO; PERAZZO, FRANCO; JAMI, HENRY; IPIÑA, JUAN PEREZ

Effect of Cr content in temperature-dependent mechanical properties and strain hardening of a twinning-induced plasticity steel

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING; Año: 2024 vol. 889

GONZALEZ ASSIAS, SERGIO LUIS; KOTIK, HECTOR GUILLERMO; PEREZ IPIÑA, JUAN ELÍAS

Fracture surface analysis of fracture mechanics specimens with splits: Determination of the physical crack extension

THEORETICAL AND APPLIED FRACTURE MECHANICS; Año: 2024 vol. 133

GONZALEZ ASSIAS, SERGIO LUIS; GIRON CAMERINI, CESAR; KOTIK, HECTOR GUILLERMO; PEREZ IPIÑA, JUAN ELÍAS

3D characterization of splits in tested fracture mechanics specimens using X-ray computed tomography

Tomography of Materials and Structures; Lugar: Amsterdam; Año: 2024 vol. 5

ESCOBAR, JAVIER; JIMÉNES, JOSÉ LUIS; ARTIGAS, ALFREDO; PEREZ IPIÑA JUAN E; MONSALVE, ALBERTO

Influence of Cold Deformation on Carbide Precipitation Kinetics in a Fe-22Mn-0.45C TWIP Steel

Materials; Lugar: Basel; Año: 2022 vol. 15 p. 3748 - 3769

BORDONE, M.; MONSALVE, A.; PEREZ IPIÑA, J.

Fracture toughness of High-Manganese steels with TWIP/TRIP effects

ENGINEERING FRACTURE MECHANICS; Año: 2022 vol. 275

GONZÁLEZ ASSÍAS, SERGIO L.; KOTIK, HECTOR G.; PEREZ IPIÑA, JUAN E.

Evolution of the geometrical and morphological characteristics of splits during fracture toughness test

THEORETICAL AND APPLIED FRACTURE MECHANICS; Lugar: Amsterdam; Año: 2022 vol. 117 p. 103179 - 103199

BORDONE, MATÍAS; PEREZ IPIÑA JUAN E; BOLMARO, RAÚL; ARTIGAS, ALFREDO; MONSALVE, ALBERTO

Mechanical properties and microstructural aspects of two high-manganese steels with twip/trip effects: A comparative study

Metals; Lugar: Basel; Año: 2021 vol. 11 p. 1 - 16

KOTIK, HECTOR G.; IPIÑA, JUAN E. PEREZ

Suggested Modifications of the ASTM D2344-16 Short-Beam Shear Test Method to Be Applied to Fiber Metal Laminates

JOURNAL OF TESTING AND EVALUATION; Año: 2021 vol. 49

ALIAS, DIEGO O.; PEREZ IPIÑA JUAN E.; BEREJNOI, CARLOS

Analysis of Estimation of Parameters in 3P-Weibull KJc Distribution: Sample Size Effect

Engineering Transactions; Lugar: Warsaw; Año: 2021 vol. 69 p. 195 - 210

BERGANT, MARCOS A.; YAWNY, ALEJANDRO A.; PEREZ IPIÑA, JUAN E.

Damage tolerant analysis of corner cracks in small nozzle process penetration of the CAREM-25 reactor pressure vessel

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING; Año: 2020 vol. 180

DELGADO RAMIREZ, EGON; PEREZ IPIÑA JUAN E; CASTRODEZA, ENRIQUE M.

Analysis of the Spb method for geometries where ηpl depends on a/ W

ENGINEERING FRACTURE MECHANICS; Lugar: Amsterdam; Año: 2020 vol. 154 p. 107416 - 107416

BERGANT, MARCOS A.; YAWNY, ALEJANDRO A.; PEREZ IPIÑA JUAN E

Evaluación de la tenacidad a la fractura de los materiales del recipiente de presión del reactor nuclear CAREM-25

Revista SAM; Lugar: Rosario; Año: 2020 vol. 2020 p. 68 - 75

BERGANT, MARCOS A.; YAWNY, ALEJANDRO A.; PEREZ IPIÑA, JUAN E.

A comparison of failure assessment diagram options for Inconel 690 and Incoloy 800 nuclear steam generators tubes

ANNALS OF NUCLEAR ENERGY; Año: 2020 vol. 140

BORDONE, MATÍAS; PEREZ IPIÑA JUAN E; MONSALVE, ALBERTO

Caracterización de material y determinación de propiedades de fractura de un acero TWIP

Remetallica; Lugar: Santiago; Año: 2020 vol. 35 p. 25 - 38

FINAMORE, C.; CASTRODEZA, E.M.; PEREZ IPIÑA, J.E.; CRISTEA, M.E.; CHEKCHAKI, M.

Effect of displacement rate and subcritical crack growth on J -R curves of API X65 steels in sour environment

ENGINEERING FRACTURE MECHANICS; Año: 2018 vol. 190 p. 134 - 145

DE OLIVEIRA FILHO, MARCUS VINÍCIUS MANFRIN; PEREZ IPIÑA, JUAN ELÍAS; BAVASTRI, CARLOS ALBERTO

Experimental identification of structural changes and cracks in beams using a single accelerometer

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING; Lugar: Berlin; Año: 2018 vol. 40 p. 106 - 120

DE BARBIERI, FLAVIO; CASTRO CERDA, FELIPE; PÉREZ-IPIÑA, JUAN; ARTIGAS, ALFREDO; MONSALVE, ALBERTO

Temperature Dependence of the Microstructure and Mechanical Properties of a Twinning-Induced Plasticity Steel

Metals; Año: 2018 vol. 8 p. 262 - 273

OLIVEIRA FILHO, MARCUS VINÍCIUS M.; IPIÑA, JUAN ELÍAS PEREZ; BAVASTRI, CARLOS ALBERTO

Analysis of sensor placement in beams for crack identification

LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES; Año: 2018 vol. 15

MENEZES, JOÃO TEIXEIRA OLIVEIRA DE; IPIÑA, JUAN E. PEREZ; CASTRODEZA, ENRIQUE M.

Normalization method for J-R curve determination using SENT specimens

ENGINEERING FRACTURE MECHANICS; Año: 2018 vol. 199 p. 658 - 671

FILGUEIRAS, PEDRO FREIRE; DE MENEZES, JOÃO TEIXEIRA OLIVEIRA; PEREZ IPIÑA, JUAN ELIAS; CASTRODEZA, ENRIQUE MARIANO

Fracture toughness of high strength seamless pipe steel from SE(T) and SE(B) specimens evaluated by different standards

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (PRINT); Año: 2018 vol. 2018 p. 1 - 11

PRIETO GERMÁN; TUCKART WALTER; PEREZ IPIÑA, J. E.

INFLUENCE OF A CRYOGENIC TREATMENT ON THE FRACTURE TOUGHNESS OF AN AISI 420 MARTENSITIC STAINLESS STEEL

MATERIALS AND TECHNOLOGY; Año: 2017 vol. 51 p. 591 - 596

WAINSTEIN, J.; PEREZ IPIÑA, J. E.

Load-Separation Method, S pb , Used to Estimate Crack Extension for J-R Curves, Modified for Geometric Variations in Blunt-Notched Remaining Ligament

JOURNAL OF TESTING AND EVALUATION; Año: 2017 vol. 45

KOTIK, HÉCTOR G.; PEREZ IPIÑA, JUAN E.

Short-beam shear fatigue behavior of fiber metal laminate (Glare)

INTERNATIONAL JOURNAL OF FATIGUE; Año: 2017 vol. 95 p. 236 - 242

WAINSTEIN, J.; PEREZ IPIÑA, J.E.

The Spb method used to estimate crack extension for coiled tubings fracture toughness tests

ENGINEERING FRACTURE MECHANICS; Año: 2017 vol. 178 p. 362 - 374

MARCOS A. BERGANT; ALEJANDRO A. YAWNY; JUAN E. PEREZ IPIÑA

J-resistance curves for Inconel 690 and Incoloy 800 nuclear steam generator tubes at room temperature and at 300°C

JOURNAL OF NUCLEAR MATERIALS; Año: 2017 vol. 486 p. 298 - 307

KOTIK, HÉCTOR; PEREZ IPIÑA, JUAN

Frequency effect in short-beam shear fatigue of a glass fiber reinforced polyester composite

INTERNATIONAL JOURNAL OF FATIGUE; Año: 2016 vol. 90 p. 116 - 124

PEREZ IPIÑA, JUAN E.; BEREJNOI, CARLOS

Analysis of specimen size conversion in the ductile to brittle transition region of ferritic steels

Procedia Structural Integrity; Lugar: Amsterdam; Año: 2016 vol. 2 p. 769 - 776

BEREJNOI, CARLOS; VACCA, SANTIAGO; GALARZA, CLAUDIA; PEREZ IPIÑA, JUAN ELÍAS

Estimation of the Fracture Toughness Threshold of a Ferritic Steel at the Lower Ductile to Brittle Transition Region

MATERIALS RESEARCH; Lugar: São Carlos, SP; Año: 2016 vol. 19 p. 1102 - 1107

BERGANT, MARCOS A.; YAWNY, ALEJANDRO A.; PEREZ IPIÑA, JUAN E.

Experimental determination of J-resistance curves of nuclear steam generator tubes

ENGINEERING FRACTURE MECHANICS; Año: 2016 vol. 164 p. 1 - 18

BERGANT, MARCOS; YAWNY, ALEJANDRO A.; PEREZ IPIÑA JUAN E

Structural integrity assessments of steam generator tubes using the FAD methodology

NUCLEAR ENGINEERING AND DESIGN; Lugar: Amsterdam; Año: 2015 vol. 295 p. 457 - 467

BEREJNOI, CARLOS; J. E. PEREZ IPIÑA

Analysis of size and temperature effects in the ductile to brittle transition region of ferritic steels

ENGINEERING FRACTURE MECHANICS; Lugar: Amsterdam; Año: 2015 vol. 148 p. 180 - 191

BERGANT, MARCOS; YAWNY, ALEJANDRO A.; PEREZ IPIÑA JUAN E

Failure Assessment Diagram in Structural Integrity Analysis of Steam Generator Tubes

Procedia Materials Science; Año: 2015 vol. 8 p. 128 - 138

KOTIK HÉCTOR; PEREZ IPIÑA JUAN E

Influence of Unifilo® Ply in the Interlaminar Shear Fatigue Resistance of GFRP

Procedia Materials Science; Lugar: Amsterdam; Año: 2015 vol. 8 p. 139 - 147

BERGANT, MARCOS; YAWNY, ALEJANDRO A.; PEREZ IPIÑA, JUAN E.

Numerical study of the applicability of the η-factor method to J-resistance curve determination of steam generator tubes using non-standard specimens

ENGINEERING FRACTURE MECHANICS; Lugar: Amsterdam; Año: 2015 vol. 146 p. 109 - 120

MONSALVE ALBERTO; BARBIERI FLAVIO; ARTIGAS ALFREDO; PEREZ IPIÑA, JUAN E.

Mechanical Behavior of a Twip Steel (Twinning Induced Plasticity)

REVISTA MATéRIA; Lugar: Rio de Janeiro; Año: 2015 vol. 20 p. 653 - 658

PRIETO GERMÁN; PEREZ IPIÑA JUAN E; TUCKART WALTER

Cryogenic treatments on AISI 420 stainless steel: Microstructure and mechanical properties.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING; Lugar: Amsterdam; Año: 2014 vol. 605 p. 236 - 243

CASTELLUCCIO GUSTAVO; PEREZ IPIÑA, JUAN E.; YAWNY, ALEJANDRO A; ERNST, HUGO

Fracture testing of the heat affected zone from welded steel pipes using an in situ stage

ENGINEERING FRACTURE MECHANICS; Lugar: Amsterdam; Año: 2013 vol. 98 p. 52 - 63

PEREZ IPIÑA, JUAN E.; IVÁN KORIN,

Effects of divider orientation split-out on fracture toughness

Fatigue and Fracturee of Engineering Materials and Structures; Año: 2013 vol. 36 p. 242 - 253

WAINSTEIN, JESSICA; PEREZ IPIÑA, JUAN E.

Fracture Toughness of HSLA Coiled Tubing Used in Oil Wells Operations

JOURNAL OF PRESSURE VESSEL TECHNOLOGY; Lugar: New York; Año: 2012 vol. 134 p. 114031 - 114039

PACH, ESTEBAN; KORIN IVAN; PEREZ IPIÑA, JUAN E.

Simple Fatigue Testing Machine for Fiber-Reinforced Polymer Composite

EXPERIMENTAL TECHNIQUES; Lugar: Westport, Conn.; Año: 2012 vol. 36 p. 76 - 82

GUSTAVO CASTELLUCCIO,; YAWNY, ALEJANDRO A; PEREZ IPIÑA, JUAN E.; ERNST, HUGO

In Situ Evaluation of Tensile Properties of Heat-Affected Zones from Welded Steel Pipes

STRAIN; Lugar: Londres; Año: 2012 vol. 48 p. 68 - 74

WAINSTEIN, JESSICA; PEREZ IPIÑA, JUAN E.

Ductile Instability Analysis of HSLA Coiled Tubing

Procedia Materials Science; Año: 2012 vol. 1 p. 297 - 304

BERGANT, MARCOS; YAWNY, ALEJANDRO A; PEREZ IPIÑA, JUAN ELÍAS

Estimation Procedure of J-resistance Curves for Through Wall Cracked Steam Generator Tubes

Procedia Materials Science; Año: 2012 vol. 1 p. 273 - 280

KORIN IVÁN; PEREZ IPIÑA, JUAN E.

Introducción deTensiones Residuales en Roscas para Mejorar la Resistencia a Fatiga

Revista SAM; Año: 2012 vol. 2012 p. 9 - 22

CHIQUITO PAULO ROBERTO; BAVASTRI CARLOS; PEREZ IPIÑA, JUAN E.

CALIBRAÇÃO DE MODELO NUMÉRICO EQUIVALENTE COM DANO A PARTIR DE TÉCNICA DE SHM E OTIMIZAÇÃO NÃO LINEAR

Mecánica Computacional; Lugar: Santa Fe; Año: 2012 vol. XXXI p. 1643 - 1654

LARRAINZAR, CÉSAR; BEREJNOI, CARLOS; PEREZ IPIÑA, JUAN E.

Comparison of 3P-Weibull parameters based on JC and KJC values

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (PRINT); Lugar: Londres; Año: 2011 vol. 34 p. 408 - 422

KORIN IVÁN; PEREZ IPIÑA, JUAN E.

Experimental evaluation of fatigue life and fatigue crack growth in a tension bolt–nut threaded connection

INTERNATIONAL JOURNAL OF FATIGUE; Lugar: Amsterdam; Año: 2011 vol. 33 p. 166 - 171

PEREZ IPIÑA, JUAN E.; BEREJNOI, CARLOS

Size Effects in the Transition Region and the Beginning of the Upper Shelf for Ferritic Steels

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (PRINT); Año: 2010 vol. 33 p. 195 - 208

LARRAINZAR, CÉSAR; IVÁN KORIN,; PEREZ IPIÑA, JUAN E.

Analysis of Fatigue Crack Growth and Estimation of Residual Life of the Walking Beam of an Oilfield Pumping Unit

ENGINEERING FAILURE ANALYSIS; Lugar: London; Año: 2010 vol. 17 p. 1038 - 1050

KORIN IVÁN; PEREZ IPIÑA, JUAN E.

Controlled residual stresses introduction to improve fatigue resistance of rotary shouldered connections used in oil drilling industry

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING; Lugar: Amsterdam; Año: 2010 vol. 87 p. 696 - 703

IVÁN KORIN,; LARRAINZAR, CÉSAR; PEREZ IPIÑA, JUAN E.

Crack Length and Stable Crack Extension Measurements from Images Acquired by means of a Conventional Flatbed Scanner

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (PRINT); Año: 2008 vol. 30 p. 876 - 884

PEREZ IPIÑA, JUAN E.

Transición Dúctil Frágil de Aceros Ferríticos. Algunos Aspectos Todavía Abiertos

Revista Sam; Lugar: Buenos Aires; Año: 2008 vol. 4 p. 1 - 11

COCCO, ROXANA; FRONTINI, PATRICIA; PEREZ IPIÑA, JUAN E.

Threshold toughness of Polymers in the ductile to brittle transition region by different approaches

ENGINEERING FRACTURE MECHANICS; Lugar: Gran Bretaña; Año: 2007 vol. 74 p. 1561 - 1578

BERTOLINO, GRACIELA; PEREZ IPIÑA, JUAN E.

Geometrical Effects on Lamellar Grey Cast Iron Fracture Toughness

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY; Lugar: Gran Bretaña; Año: 2006 vol. 179 p. 202 - 206

BERTOLINO, GRACIELA; PEREZ IPIÑA, JUAN E.; MEYER, GABRIEL

INFLUENCE OF THE CRACK-TIP HYDRIDE CONCENTRATION ON THE FRACTURE TOUGHNESS OF ZIRCALOY-4

JOURNAL OF NUCLEAR MATERIALS; Año: 2006 vol. 348 p. 205 - 212

COCCO, ROXANA; FRONTINI, PATRICIA; PEREZ IPIÑA, JUAN E.

FRACTURE TOUGHNESS OF POLYMERS IN THE DUCTILE-TO-BRITTLE TRANSITION REGION: STATISTICAL APPROACH AND LOWER BOUND DETERMINATION

JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS; Año: 2005 vol. 43 p. 3674 - 3684

E.M. CASTRODEZA, F.L. BASTIAN, J.E. PEREZ IPIÑA

Fracture Toughness of Unidirectional Fiber-Metal Laminates: Crack Orientation Effect

ENGINEERING FRACTURE MECHANICS; Año: 2005 vol. 72 p. 2268 - 2279

CASTRODEZA, ENRIQUE MARIANO; PEREZ IPIÑA, JUAN E.; BASTIAN, FERNANDO L

FRACTURE TOUGHNESS EVALUATION OF UNIDIRECTIONAL FIBRE METAL LAMINATES USING TRADITIONAL CTOD AND SCHWALBE (d5) METHODOLOGIES

ENGINEERING FRACTURE MECHANICS; Año: 2004 vol. 71 p. 1127 - 1138

BEREJNOI, CARLOS; PEREZ IPIÑA, JUAN E.

EVALUATION OF SOME METHODS FOR LOWER BOUND DETERMINATION IN THE TRANSITION REGION OF FERRITIC STEELS

LATIN AMERICAN APPLIED RESEARCH; Año: 2004 vol. 34 p. 241 - 248

CASTRODEZA, ENRIQUE MARIANO; BASTIAN, FERNANDO L; PEREZ IPIÑA, JUAN E.

RESIDUAL STRENGTH OF UNIDIRECTIONAL FIBRE-METAL LAMINATES BASED ON Jc TOUGHNESS OF C(T) AND SE(B) SPECIMENS: COMPARISON WITH M(T) TEST RESULTS

Fatigue Fracture Of Engineering Materials Structures; Año: 2004 vol. 27 p. 923 - 929

YAWNY, ALEJANDRO A; PEREZ IPIÑA, JUAN E.

IN-SITU FRACTURE TOUGHNESS IN SEM

JOURNAL OF TESTING AND EVALUATION; Año: 2003 vol. 31 p. 413 - 422

BERTOLINO, GRACIELA; MEYER, GABRIEL; PEREZ IPIÑA, JUAN E.

EFFECTS OF HYDROGEN CONTENT AND TEMPERATURE ON FRACTURE TOUGHNESS OF ZIRCALOY-4

Journal Of Nuclear Materials; Año: 2003 vol. 320 p. 272 - 279

PEREZ IPIÑA, JUAN E.; YAWNY, ALEJANDRO A; GONZALEZ OLIVER, CARLOS

ON THE APPLICABILITY OF ELASTIC-PLASTIC FRACTURE MECHANICS TO DISCONTINUOUSLY REINFORCED ALUMINUM COMPOSITES

Journal Of Composite Materials; Año: 2003 vol. 37 p. 2001 - 2010

BERTOLINO, GRACIELA; MEYER, GABRIEL; PEREZ IPIÑA, JUAN E.

IN-SITU CRACK GROWTH OBSERVATION AND FRACTURE TOUGHNESS MEASUREMENT OF HYDROGEN CHARGED ZIRCALOY-4

Journal Of Nuclear Materials; Año: 2003 vol. 322 p. 57 - 65

CASTRODEZA, ENRIQUE MARIANO; BASTIAN, FERNANDO L; PEREZ IPIÑA, JUAN E.

CRITICAL FRACTURE TOUGHNESS, JC AND 5C, OF UNIDIRECTIONAL FIBRE-METAL LAMINATES

JOURNAL THIN WALLED STRUCTURES; Año: 2003 vol. 41 p. 1089 - 1101

CASTRODEZA, ENRIQUE MARIANO; BASTIAN, FERNANDO L; PEREZ IPIÑA, JUAN E.

TENACIDADE À FRATURA DE LAMINADOS FIBRA-METAL

M & M - METALURGIA E MATERIAIS; Lugar: Sao Paulo; Año: 2003 p. 634 - 635

BERTOLINO, GRACIELA; PEREZ IPIÑA, JUAN E.; MEYER, GABRIEL

MECHANICAL PROPERTIES DEGRADATION AT ROOM TEMPERATURE IN ZRY-4 BY HYDROGEN BRITTLENESS

MATERIALS RESEARCH; Lugar: Sao Carlos SP, Brasil; Año: 2002 vol. 5 p. 119 - 124

CASTRODEZA, ENRIQUE MARIANO; RODRIGUES TOUÇA, JOSÉ M; PEREZ IPIÑA, JUAN E.; BASTIAN, FERNANDO L

DETERMINATION OF CTODC IN FIBRE REINFORCED METALL LAMINATES BY ASTM AND SCHWALBE METHODS

MATERIALS RESEARCH; Lugar: Sao Carlos SP, Brasil; Año: 2002 vol. 5 p. 125 - 129

CASTRODEZA, ENRIQUE MARIANO; PEREZ IPIÑA, JUAN E.; BASTIAN, FERNANDO L

EXPERIMENTAL TECHNIQUES FOR FRACTURE INSTABILITY TOUGHNESS DETERMINATION OF UNIDIRECTIONAL FIBRE-REINFORCED METAL LAMINATES

Fatigue Fracture Of Engineering Materials Structures; Año: 2002 vol. 25 p. 999 - 1008

CASTRODEZA, ENRIQUE MARIANO; PEREZ IPIÑA, JUAN E.; BASTIAN, FERNANDO L

FRACTURE MICROMECHANISMS IN ARAMID FIBER-METALL LAMINATES IN SITU OBSERVATIONS

Journal Of Composite Materials; Año: 2002 vol. 36 p. 387 - 400

BERTOLINO, GRACIELA; PEREZ IPIÑA, JUAN E.; MEYER, GABRIEL

DEGRADATION OF THE MECHANICAL PROPERTIES OF ZIRCALOY-4 BY INTERACTION WITH HYDROGEN

JOURNAL OF ALLOYS AND COMPOUNDS; Año: 2002 vol. 330 p. 408 - 413

BERTOLINO, GRACIELA; MARENGO, ALFREDO; PEREZ IPIÑA, JUAN E.

METHODOLOGIES TO EVALUATE FRACTURE TOUGHNESS IN LAMELLAR GRAY CAST IRONS

International Journal Of Cast Metals Research; Lugar: Sheffield, UK; Año: 2002 vol. 14 p. 265 - 274

BILMES, PABLO; LLORENTE, CARLOS; PEREZ IPIÑA, JUAN E.

TOUGHNESS AND MICROSTRUCTURE OF 13Cr4NiMo HIGH STRENGTH STEEL WELDS

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE; Año: 2000 vol. 9 p. 609 - 615

PEREZ IPIÑA, JUAN E.; YAWNY, ALEJANDRO A; STUCKE, RAÚL; GONZALEZ OLIVER, CARLOS

FRACTURE TOUGHNESS IN METAL MATRIX COMPOSITES

MATERIALS RESEARCH; Año: 2000 vol. 3 p. 74 - 78

BEREJNOI, CARLOS; PEREZ IPIÑA, JUAN E.

REPRODUCIBILITY OF POP-INS IN LABORATORY TESTING OF WELDED JOINTS

MATERIALS RESEARCH; Año: 2000 vol. 3 p. 139 - 146

BEREJNOI, CARLOS; PEREZ IPIÑA, JUAN E.

AN ALTERNATIVE METHOD FOR SMALL POP-IN ASSESSMENT

ENGINEERING FRACTURE MECHANICS; Año: 1998 vol. 59 p. 667 - 681

BERTOLINO, GRACIELA; CASTRODEZA, ENRIQUE MARIANO; PEREZ IPIÑA, JUAN E.; APREA, JOSÉ LUIS; MEYER, GABRIEL

EVALUACION DE LA SUSCEPTIBILIDAD A LA FRAGILIZACION POR HIDROGENO DE ACEROS ESTRUCTURALES

REVISTA MATéRIA; Lugar: Rio de Janeiro; Año: 1997 vol. 2 p. 7 - 7

PEREZ IPIÑA, JUAN E.

CTOD WITH SLOW SATBLE CRACK GROWTH: ANALYSIS OF THE ELASTIC COMPONENT

Fatigue Fracture Of Engineering Materials Structures; Año: 1997 vol. 20 p. 1075 - 1082

MARENGO, ALFREDO; PEREZ IPIÑA, JUAN E.

PRESSURE VESSEL STEEL FRACTURE TOUGHNESS IN THE REGIME RT TO 400ºC

NUCLEAR ENGINEERING AND DESIGN; Año: 1996 vol. 16 p. 215 - 222

MANZIONE, PABLO NICOLÁS; PEREZ IPIÑA, JUAN E.

PLASTIC HINGE MODEL: GENERALIZATION TO A BIDIMENSIONAL SITUATION

Fatigue Fracture Of Engineering Materials Structures; Año: 1994 vol. 17 p. 1147 - 1156

PEREZ IPIÑA, JUAN E.; CENTURION, SERGIO M; ASTA, EDUARDO P

MINIMUM SPECIMEN NUMBER FOR FRACTURE TOUGHNESS CHARACTERIZATION IN DUCTILE- TO- BRITTLE TRANSISION REGION

ENGINEERING FRACTURE MECHANICS; Año: 1994 vol. 47 p. 457 - 463

PEREZ IPIÑA, JUAN E.

CTOD FOR SLOW STABLE CRACK GROWTH

Fatigue Fracture Of Engineering Materials Structures; Año: 1992 vol. 15 p. 1091 - 1100

SANTARELLI, EDGARDO LUIS; PEREZ IPIÑA, JUAN E.

FRACTURE TOUGHNESS DETERMINATION RELATED TO INDENTATION PROBLEMS AVOIDANCE IN 3P-SENB SPECIMENS

JOURNAL OF TESTING AND EVALUATION; Año: 1992 vol. 20 p. 349 - 356

MANZIONE, PABLO NICOLÁS; PEREZ IPIÑA, JUAN E.

SENSITIVITY ANALYSIS OF THE DOUBLE CLIP GAUGE METHOD

Fatigue Fracture Of Engineering Materials Structures; Año: 1991 vol. 14 p. 887 - 896

PEREZ IPIÑA, JUAN E.

UNLOADING COMPLIANCE METHOD WITH NORMAL PRECISION INSTRUMENTATION. ROTATION CORRECTIONS

ENGINEERING FRACTURE MECHANICS; Año: 1990 vol. 36 p. 797 - 804

PEREZ IPIÑA, JUAN E.; SANTARELLI, EDGARDO LUIS

ROTATION CORRECTIONS IN 3P-SENB SPECIMENS

JOURNAL OF TESTING AND EVALUATION; Año: 1989 vol. 17 p. 381 - 393

BEDUCCI, ROBERTO; LOZZIA, ENRIQUE F; PEREZ IPIÑA, JUAN E.; TOLOY, HIPÓLITO LUIS

ENSAYOS DE TENACIDAD A LA FRACTURA DE UNA SOLA PROBETA. METODOS DE DESCARGAS PARCIALES Y DOBLE CLIP GAUGE

Metalurgia Moderna; Año: 1987 vol. 3 p. 15 - 20

BEDUCCI, ROBERTO; RIVIERE, JULIO; PEREZ IPIÑA, JUAN E.

AUTOMATIC LOW TEMPERATURE CONTROL FOR FRACTURE MECHANICS TESTS

EXPERIMENTAL TECHNIQUES; Año: 1987 vol. 11 p. 24 - 26

BEROQUI, MARIO; VOLPI, CARLOS; PEREZ IPIÑA, JUAN E.

A LOW COST FURNACE TEMPERATURE CONTROL FOR CURING PHOTOELASTIC MODELS AND STRESS FREEZING

EXPERIMENTAL TECHNIQUES; Año: 1986 vol. 9 p. 32 - 35

PEREZ IPIÑA, JUAN E.; TOLOY, HIPÓLITO LUIS

EFFECT OF SEVERAL PHYSICAL AND MECHANICAL VARIABLES ON THE RELATION BETWEEN COD AND J.

ENGINEERING FRACTURE MECHANICS; Año: 1986 vol. 24 p. 1 - 9

CARIDE, OMAR; CHAVES, ROBERTO; PEREZ IPIÑA, JUAN E.

ESTUDIO DE FOTOELASTICIDAD RELACIONADO CON MATERIALES DE RESTAURACION DEL SECTOR ANTERIOR

Avances En Odontoentomatología; Año: 1985 vol. 3 p. 1 - 3

PEREZ IPIÑA, JUAN ELÍAS; CARIDE, OMAR; CHAVES, ROBERTO; PEREZ IPIÑA, JUAN E.

ANALISIS FOTOELASTICO DE TENSIONES EN HUESO SOPORTE DE DIENTES PILARES DE PROTESIS FIJA TIPO CANTILEVER

Revista de La Asociación Odontológica Argentina; Año: 1982 vol. 70 p. 399 - 406