Physical, mechanical properties and antimicrobial analysis of a novel CaO·Al2O3 compound reinforced with Al or Ag particles

GÓMEZ DE SARAVIA, SANDRA G.; GONZÁLEZ-MORÁN, CARLOS O.; RASTELLI, SILVIA E.; ROCHA-RANGEL, ENRIQUE; ORTEGA-AVILÉS, MAYAHUEL; MIRANDA-HERNÁNDEZ, JOSÉ G.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS

ELSEVIER SCIENCE BV

Lugar: Amsterdam; Año: 2019 vol. 97 p. 385 - 395

1751-6161

Ceramic-metal (CaO· Al2O3-Al and CaO·Al2O3-Ag) compounds were prepared by mechanical milling and consolidated through an in-situ sintering process. The aim of this work is to study the effects of the Al and Ag particles to ceramic-base compound, primarily in the microstructure, and its mechanical and antimicrobial properties. Chemical systems with a 1:1 molar ratio between CaCO3 and Al2O3 powder were formed, with the addition of 10 wt.% Al or 10 wt.% Ag, respectively. The compound material that consolidated were microstructurally characterized through X-ray diffraction, scanning electron microscopy, optic microscopy, and X-ray computed tomography. In addition, the hardness, the fracture toughness, the transversal elastic modulus, and the antimicrobial property were evaluated. The results of X-ray diffraction identified the formation of the calcium aluminate phases, such as CaO·6Al2O3 (hibonite:CA6), CaO·2Al2O3 (grossite:CA2), and CaO·Al2O3 (krotite:CA); as well as Al and Ag were identified in its respective system. In addition, the mechanical properties show changes compared to the reference material that was synthesized under the same conditions and, finally, these materials also have an antimicrobial effect, against the Staphylococcus bacterium that is common in the oral cavity, when studied in synthetic saliva.