Effect of weld superpulse time on the microstructural evolution of a low carbon steels

GUALCO, AGUSTIN; RAAD, FRANCO; ZAPPA, SEBASTIAN

REVISTA MATéRIA

UNIV FED RIO DE JANEIRO

Año: 2018 vol. 23 p. 1 - 10

1517-7076

The Super Pulse arc type was developed to provide a solution to butt root pass beads in the semi-automatic welding process with gas protection (GMAW). Unlike standard pulse welding, the Super Pulse uses a sequence of different pulse waveforms to create a cord shape and appearance similar to the GTAW process. It uses higher amperage in the primary phase to improve penetration and low amperage in the second phase to re-duce the heat input. Spray transfer is used in the primary phase to improve penetration and short arc in the secondary phase to cool the solder bath giving less heat transfer and less distortion to the base material. In the literature there is little information regarding the relationship between the Super Pulse variables and the microstructural characteristics of the deposited metal. The objective of this work was to evaluate the influ-ence of the times of each phase in Super Pulse mode, on the geometric characteristics of the cord and the solidification in weld deposits of low carbon steels. For this purpose, strands should be welded on an IRAM - IAS U500 42 - F24 plate by varying the phase time of the Super Pulse. In cross sections, the geometry of the bead was determined and in longitudinal sections, the microstructure and the characteristics of the molten and affected areas were determined. Preliminary results showed that bead geometry and solidification were strongly influenced by pulse parameters.