INVESTIGADORES
MANFREDI Liliana Beatriz
artículos
Título:
Processing and properties of resol and epoxy blends for resin transfer molding
Autor/es:
L. B. MANFREDI; J. A. CLARO; J.M.KENNY; I. MONDRAGÓN EGAÑA; A. VÁZQUEZ
Revista:
POLYMER COMPOSITES
Editorial:
Society of Plastics Engineers
Referencias:
Lugar: Brookfield, CT; Año: 1999 vol. 20 p. 675 - 682
ISSN:
0272-8397
Resumen:
Blends of epoxy and resol matrices for resin transfer molding (RTM) have been prepared and characterized with the double aim of improving the processability of resols and the fire resistance of epoxies. The reaction rate of the overall system is enhanced by the exothermic reaction between the epoxy and an aliphatic amine, which also promotes the resol reaction. In addition, the mechanical behavior of the resol is improved as the shear stress increases with the addition of epoxy resins. However, blending also produces a reduction of the intrinsic fire resistance of phenolic resins. The study demonstrated the feasibility of producing blends for matrices of composites processed by resin transfer molding. The recommended range for the epoxy content was determined through a balance of processability, fire resistance, and mechanical properties of the composites obtained. Moreover, the effects of fibre surface modifications were studied as a way to promote higher shear stresses in the epoxy - resol matrix composite without jeopardizing the fire resistance properties.