INVESTIGADORES
BOERI Roberto Enrique
artículos
CAPURRO, CONSTANTINO; BOERI, ROBERTO; CICUTTI, CARLOS
Characterization of Nonmetallic Inclusions of Al-Killed Ca-Treated Steels by Automated SEM/EDS and Its Application to Industrial Case Studies
STEEL RESEARCH INTERNATIONAL; Año: 2022 vol. 93
BASSO, ALEJANDRO DANIEL; CALDERA, MARTIN; TENAGLIA, NICOLÁS EMANUEL; FERNANDINO, DIEGO; BOERI, ROBERTO ENRIQUE
Influence of Free Ferrite on the Mechanical Properties of High Strength Intercritical Austempered Ductile Iron
Frattura ed Integrità Strutturale; Año: 2022 vol. 16 p. 519 - 529
POLISERPI, MARIANA; PERE BARRIOBERO-VILA; GUILLERMO REQUENA; LAURA NOEL GARCIA; ALFREDO TOLLEY; CECILIA POLETTI; TOMAS VOJTEK; ADAM WEISER; NORBERT SCHELL; ANDREAS STARK; ROBERTO E BOERI; SOMMADOSSI, SILVANA
TEM and Synchrotron X-ray Study of the Evolution of Phases Formed During Bonding of IN718/Al/IN718 Couples by TLPB
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE; Lugar: Berlin; Año: 2021 vol. 52 p. 1382 - 1394
TENAGLIA, NICOLÁS E.; MASSONE, JUAN M.; BASSO, ALEJANDRO D.; BOERI, ROBERTO E.
Influence of the Austempering Time on the Mechanical Properties of Carbide-Free Bainitic Cast Steels
INTERNATIONAL JOURNAL OF METALCASTING; Año: 2021 vol. 15 p. 906 - 915
FERNANDINO, DIEGO O.; DAGA, BERNARDO; BOERI, ROBERTO E.
Micromechanical characterization of ferritic ductile cast iron by using instrumented indentation and atomic force microscopy
Material Design and Processing Communications; Año: 2021 vol. 3
POLISERPI, MARIANA; BUZOLIN, RICARDO; BOERI, ROBERTO ENRIQUE; POLETTI, CECILIA; SOMMADOSSI, SILVANA
Microstructure Evolution and Phase Identification in Ni-Based Superalloy Bonded by Transient Liquid Phase Bonding
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE; Lugar: Berlin; Año: 2021 vol. 52 p. 1695 - 1707
POLISERPI, MARIANA; BARRIOBERO-VILA, PERE; REQUENA, GUILLERMO; GARCÍA, LAURA NOEL; TOLLEY, ALFREDO; POLETTI, CECILIA; VOJTEK, TOMÁ; WEISER, ADAM; SCHELL, NORBERT; STARK, ANDREAS; BOERI, ROBERTO; SOMMADOSSI, SILVANA
TEM and Synchrotron X-ray Study of the Evolution of Phases Formed During Bonding of IN718/Al/IN718 Couples by TLPB
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE; Año: 2021 vol. 52 p. 1382 - 1394
FERNANDINO, DIEGO O.; LÓPEZ, MARCOS G.; BOERI, ROBERTO E.; MASSONE, JUAN M.
Influence of Microshrinkage Cavities on the Plastic Deformation and Fracture Under Tensile Loading in Ferritic Ductile Iron
INTERNATIONAL JOURNAL OF METALCASTING; Año: 2021 vol. 15 p. 1084 - 1090
GARCÍA, LAURA N.; MAGNABOSCO, RODRIGO; BOERI, ROBERTO E.; TOLLEY, ALFREDO J.; SAAVEDRA, MARCELA E.
Formation of Cu-rich Nanoprecipitates in Cu Containing Pearlitic SGI
INTERNATIONAL JOURNAL OF METALCASTING; Año: 2021 vol. 15 p. 1164 - 1174
LÓPEZ, MARCOS G.; MASSONE, JUAN M.; BOERI, ROBERTO E.
An integrated approach for the characterization of the solidification structure of free graphite cast irons Ein integrierter ansatz zur charakterisierung der erstarrungsstruktur von gusseisen mit freiem graphit
PRAKTISCHE METALLOGRAPHIE; Año: 2020 vol. 57 p. 672 - 687
TENAGLIA, NICOLÁS EMANUEL; BOERI, ROBERTO ENRIQUE; BASSO, ALEJANDRO DANIEL
Mechanical properties of a carbide-free bainitic cast steel with dispersed free ferrite
MATERIALS SCIENCE AND TECHNOLOGY; Año: 2020 vol. 36 p. 108 - 117
FERNANDINO, DIEGO O.; DI COCCO, VITTORIO; BOERI, ROBERTO E.; IACOVIELLO, FRANCESCO
Microstrain measurements and damage analysis during tensile loading of intercritical austempered ductile iron
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (PRINT); Año: 2020
FERNANDINO, D.O.; TENAGLIA, N.; BOERI, R.E.; DI COCCO, V.; BELLINI, C.; IACOVIELLO, F.
Microstructural damage evaluation of ferritic-ausferritic spheroidal graphite cast iron
Frattura ed Integrita Strutturale; Año: 2020 vol. 14 p. 477 - 485
GARCÍA, LAURA NOEL; CARAZO, FERNANDO DIEGO; BOERI, ROBERTO ENRIQUE
Ferrite Growth During Cooling Through the Ferrite-Austenite-Graphite Field in SGI
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE; Año: 2020 vol. 51 p. 631 - 637
FERNANDINO, DIEGO O.; BOERI, ROBERTO E.; DI COCCO, VITTORIO; BELLINI, COSTANZO; IACOVIELLO, FRANCESCO
Damage evolution during tensile test of austempered ductile iron partially austenized
Material Design & Processing Communications; Año: 2020 vol. 2
LÓPEZ, MARCOS G.; MASSONE, JUAN M.; BOERI, ROBERTO E.
Examination of the Size and Morphology of Austenite Grains in Lamellar Graphite Cast Iron
INTERNATIONAL JOURNAL OF METALCASTING; Año: 2020 vol. 14 p. 689 - 695
POLISERPI, MARIANA; BUZOLIN, RICARDO; BOERI, ROBERTO; POLETTI, CECILIA; SOMMADOSSI, SILVANA
Analysis of Splitting and Martensitic Transformation of AlNi Intermetallic Obtained by Transient Liquid Phase Bonding
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE; Año: 2020 vol. 51 p. 916 - 924
FERNANDINO, D.O.; TENAGLIA, N.; DI COCCO, V.; BOERI, R.E.; IACOVIELLO, F.
Relation between microstructural heterogeneities and damage mechanisms of a ferritic spheroidal graphite cast iron during tensile loading
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (PRINT); Año: 2020 vol. 43 p. 1262 - 1273
TENAGLIA, NICOLÁS EMANUEL; PEDRO, DIEGO IVÁN; BOERI, ROBERTO ENRIQUE; BASSO, ALEJANDRO DANIEL
Influence of silicon content on mechanical properties of IADI obtained from as cast microstructures
INTERNATIONAL JOURNAL OF CAST METALS RESEARCH; Año: 2020 vol. 33 p. 72 - 79
TENAGLIA, NICOLÁS E.; MASSONE, JUAN M.; BOERI, ROBERTO E.; SPEER, JOHN G.
Effect of microsegregation on carbide-free bainitic transformation in a high-silicon cast steel
MATERIALS SCIENCE AND TECHNOLOGY; Año: 2020 vol. 36 p. 690 - 698
BOERI, ROBERTO E.; LÓPEZ, MARCOS G.; TENAGLIA, NICOLÁS E.; MASSONE, JUAN M.
Solidification, Macrostructure and Shrinkage Formation of Ductile and Compacted Irons
INTERNATIONAL JOURNAL OF METALCASTING; Año: 2020
TENAGLIA, NICOLÁS E.; MASSONE, JUAN M.; BASSO, ALEJANDRO D.; BOERI, ROBERTO E.
Influence of the Austempering Time on the Mechanical Properties of Carbide-Free Bainitic Cast Steels
INTERNATIONAL JOURNAL OF METALCASTING; Año: 2020
TENAGLIA, NICOLÁS EMANUEL; BASSO, ALEJANDRO; MASSONE, JUAN; BOERI, ROBERTO
Development of ultra-high strength carbide-free bainitic cast steels
INTERNATIONAL JOURNAL OF CAST METALS RESEARCH; Año: 2020 vol. 33 p. 258 - 265
LÓPEZ, MARCOS G.; MASSONE, JUAN M.; BOERI, ROBERTO E.
An integrated approach for the characterization of the solidification structure of free graphite cast irons Ein integrierter ansatz zur charakterisierung der erstarrungsstruktur von gusseisen mit freiem graphit
PRAKTISCHE METALLOGRAPHIE; Año: 2020 vol. 57 p. 672 - 687
FERNANDINO, DIEGO O.; BOERI, ROBERTO E.
In-situ microscopic analysis of ferritic ductile iron during tensile loading: Relation between matrix heterogeneities and damage mechanisms
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (PRINT); Año: 2019 vol. 42 p. 2220 - 2231
LÓPEZ, MARCOS G.; BREWER, LUKE N.; MASSONE, JUAN M.; BOERI, ROBERTO E.
EBSD Analysis of the Primary Austenite Grains in Lamellar Graphite Cast Iron
Metallography, Microstructure, and Analysis; Año: 2019 vol. 8 p. 386 - 392
GARCÍA, LAURA N.; TOLLEY, ALFREDO J.; CARAZO, FERNANDO D.; BOERI, ROBERTO E.
Identification of Cu-rich precipitates in pearlitic spheroidal graphite cast irons
MATERIALS SCIENCE AND TECHNOLOGY; Lugar: London; Año: 2019 vol. 35 p. 2252 - 2258
GARCÍA, LAURA NOEL; CARAZO, FERNANDO DIEGO; BOERI, ROBERTO ENRIQUE
About Equilibrium Mode Ruling Ferritic Transformation in Low-Alloy SGI
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE; Año: 2019 vol. 50 p. 5585 - 5593
LÓPEZ, MARCOS; MASSONE, JUAN M.; BOERI, ROBERTO ENRIQUE
Evolution of the macrostructure of gray cast iron from eutectic to hypereutectic composition
MATERIALS SCIENCE FORUM; Año: 2018 vol. 925 p. 110 - 117
FERNANDINO, DIEGO O.; BOERI, ROBERTO E.; MASSONE, JUAN M.
Mechanism of damage of ferritic ductile Iron, influence of matrix heterogeneity
MATERIALS SCIENCE FORUM; Año: 2018 vol. 925 p. 288 - 295
TENAGLIA, NICOLÁS EMANUEL; BOERI, ROBERTO ENRIQUE; MASSONE, JUAN MIGUEL; BASSO, ALEJANDRO DANIEL
Assessment of the austemperability of high-silicon cast steels through Jominy hardenability tests
MATERIALS SCIENCE AND TECHNOLOGY; Año: 2018 p. 1 - 11
TENAGLIA, NICOLÁS EMANUEL; RIVAS, ANA LUISA; BOERI, ROBERTO ENRIQUE; MASSONE, JUAN MIGUEL; BASSO, ALEJANDRO DANIEL
Study of austempering kinetics of high silicon bainitic cast steels
INTERNATIONAL JOURNAL OF CAST METALS RESEARCH; Año: 2018
TENAGLIA, NICOLÁS E.; BOERI, ROBERTO E.; BASSO, ALEJANDRO D.; MASSONE, JUAN M.
Macro and microstructural characterisation of high Si cast steels;Study of microsegregation patterns
INTERNATIONAL JOURNAL OF CAST METALS RESEARCH; Año: 2017 vol. 30 p. 103 - 111
TENAGLIA, NICOLÁS; BOERI, ROBERTO ENRIQUE; RIVERA, GRACIELA LEONOR; MASSONE, JUAN MIGUEL
Study of shrinkage porosity in spheroidal graphite cast iron
INTERNATIONAL JOURNAL OF CAST METALS RESEARCH; Lugar: London; Año: 2016 vol. 29 p. 112 - 120
SOSA, AMADEO DANIEL; ROSALES, CAREN; BOERI, ROBERTO ENRIQUE; SIMISON, SILVIA NOEMI
Corrosion Mechanisms in ADI parts
INTERNATIONAL JOURNAL OF CAST METALS RESEARCH; Lugar: London; Año: 2016 vol. 29 p. 106 - 111
FERNANDINO, DIEGO OMAR; BOERI, ROBERTO ENRIQUE
Fractographic Analysis of Austempered Ductile Iron
Fatigue and Fracture of Engineering Materials and Structures; Año: 2016 vol. 39 p. 583 - 598
LÓPEZ, MARCOS G.; RIVERA, GRACIELA L.; MASSONE, JUAN M.; BOERI, ROBERTO E.
Study of the solidification structure of compacted graphite cast iron
INTERNATIONAL JOURNAL OF CAST METALS RESEARCH; Año: 2016 vol. 29 p. 266 - 271
DIEGO FERNANDINO; ROBERTO BOERI
Fracture of pearlitic ductile cast iron under different loading conditions
Fatigue and Fracture of Engineering Materials and structures; Año: 2015 vol. 38 p. 80 - 90
DIEGO FERNANDINO; ADRIAN CISILINO; ROBERTO BOERI
Determination of Effective Elastic Properties of Ferritic Ductile Cast Iron by Computational Homogenization, Micrography and Microindentation Tests
MECHANICS OF MATERIALS; Lugar: Amsterdam; Año: 2015 vol. 83 p. 110 - 121
FERNANDINO, D.O.; BOERI, R.
Study of the fracture of ferritic ductile cast iron under different loading conditions
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (PRINT); Año: 2015 vol. 38 p. 610 - 620
DIEGO FERNANDINO; ROBERTO BOERI
Study of the fracture of ferritic ductile cast iron under different loading conditions
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (PRINT); Lugar: Londres; Año: 2014
ALEJANDRO BASSO; NICOLÁS TENAGLIA; ROBERTO BOERI; JUAN MASSONE
Influence of the chemical composition on the ausferritic transformation in carbide-free bainitic cast steel
MATERIALS SCIENCE FORUM; Año: 2014 vol. 793 p. 85 - 91
ROBERTO BOERI; RICARDO MARTÍNEZ
Embrittlement of ADI by contact with liquids: Influence of alloy content and preventive methods
MATERIALS SCIENCE AND TECHNOLOGY; Lugar: London; Año: 2013 vol. 29 p. 665 - 671
DIEGO FERNANDINO; JUAN MASSONE; ROBERTO BOERI
Characterization of the Austemperability of partially austenitized ductile iron
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY; Lugar: Amsterdam; Año: 2013 vol. 213 p. 1801 - 1809
MARTÍN CALDERA; RICARDO MARTÍNEZ; ROBERTO BOERI; JORGE SIKORA
Evaluation of water Embrittlement on Dual Phase ADI
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (PRINT); Lugar: Londres; Año: 2011 vol. 34 p. 774 - 781
JUAN MASSONE; ROBERTO BOERI
Failure of forklift forks
ENGINEERING FAILURE ANALYSIS; Año: 2010 vol. 17 p. 1062 - 1068
GRACIELA RIVERA; ROBERTO BOERI; JORGE SIKORA
Growth of eutectic austenite in free graphite cast irons
KEY ENGINEERING MATERIALS; Año: 2010 vol. 457 p. 67 - 72
SUSANA MONTECINOS; ADELA CUNIBERTI; M.L. CASTRO; ROBERTO BOERI
Phase transformations during continuous cooling of polycrystalline â-CuAlBe alloys
JOURNAL OF ALLOYS AND COMPOUNDS; Año: 2009 vol. 476 p. 278 - 283
PABLO DAVID; JUAN MASSONE; ROBERTO BOERI; JORGE SIKORA
Gating System Design to Cast thin Wall Ductile Iron
Foundry Trade Journal; Año: 2009 vol. 182 p. 119 - 126
GRACIELA RIVERA; PABLO CALVILLO; ROBERTO BOERI; YVAN HOUBAERT; JORGE SIKORA
Examination of the solidification macrostructure of spheroidal and flake graphite cast irons using DAAS ans ESBD
MATERIALS CHARACTERIZATION; Año: 2008 vol. 59 p. 1342 - 1348
D.J.CELENTANO; P.M. DARDATI; L.A. GODOY; R.E. BOERI
Computational Simulation of Microstructure Evolution during solidification of Ductile Cast Iron
INTERNATIONAL JOURNAL OF CAST METALS RESEARCH; Año: 2008 vol. 21 p. 416 - 426
BERNARDO DAGA; GRACIELA RIVERA; ROBERTO BOERI
Review of the regulations for the use of stainless steel for orthopedic implants in Argentina
Journal of Physics, Conference Series; Año: 2007 vol. 90 p. 1 - 6
PABLO DAVID; JUAN MASSONE; ROBERTO BOERI; JORGE SIKORA
Gating System Design To Cast Thin Wall Ductile Iron Plates
INTERNATIONAL JOURNAL OF CAST METALS RESEARCH; Lugar: London; Año: 2006 vol. 19 p. 98 - 109
CARLOS CICUTTI; ROBERTO BOERI
Analysis of solute distribution during the solidification of low alloyed steels
STEEL RESEARCH; Año: 2006 vol. 77 p. 194 - 201
JORGE SIKORA; ROBERTO BOERI
Advances in Ductile Iron Research: new metallurgical understanding and its technological significance
Archives of Foundry; Lugar: Kracow, Poland; Año: 2005 vol. 5 p. 354 - 360
MARTIN CALDERA; GRACIELA RIVERA; ROBERTO BOERI; JORGE SIKORA
Precipitation and dissolution of carbides in low alloy ductile iron plates of varied thickness
MATERIALS SCIENCE AND TECHNOLOGY; Año: 2005 vol. 21 p. 1187 - 1191
GRACIELA RIVERA; ROBERTO BOERI; JORGE SIKORA
Reply to comments on the solidification of gray cast iron
SCRIPTA MATERIALIA; Año: 2005 vol. 52 p. 251 - 252
GRACIELA RIVERA; ROBERTO BOERI; JORGE SIKORA
Solidification of Gray Cast Iron
SCRIPTA MATERIALIA; Año: 2004 vol. 50 p. 331 - 335
PABLO DAVID; JUAN MASSONE; ROBERTO BOERI; JORGE SIKORA
Mechanical Properties of Thin Wall Ductile Iron ? Influence of Carbon Equivalent and Graphite Distribution
ISIJ INTERNATIONAL; Año: 2004 vol. 44 p. 1180 - 1187
MARTIN CALDERA; JUAN MASSONE; ROBERTO BOERI; JORGE SIKORA
Impact Properties of Thin Wall Ductile Iron
ISIJ INTERNATIONAL; Año: 2004 vol. 44 p. 731 - 736
GIACOPINI, A.; BOERI, R.E.; SIKORA, J.A.
Carbide dissolution in thin wall ductile iron
MATERIALS SCIENCE AND TECHNOLOGY; Año: 2003 vol. 19 p. 1755 - 1760