INVESTIGADORES
GALANO Marina Lorena
artículos
Título:
Extrusion textures in Al, 6061 alloy and 6061/SiCp nanocomposites
Autor/es:
XIA JIANG; MARINA GALANO; FERNANDO AUDEBERT
Revista:
MATERIALS CHARACTERIZATION
Editorial:
ELSEVIER SCIENCE INC
Referencias:
Lugar: Amsterdam; Año: 2014 vol. 88 p. 111 - 118
ISSN:
1044-5803
Resumen:
The 6061 alloymatrix composites reinforcedwith 10 wt.%and 15 wt.% of SiC nanoparticleswith
an average diameter of ~500 nmwere hot extruded in strip shape fromballmilled powders. The
microstructures and textures of the hot extruded nanocomposites have been investigated by
means of three dimensional orientation distribution functions and electron backscatter
diffraction (EBSD) techniques. Pure Al and 6061 alloy extruded strips from atomised powders
have been produced for comparison purposes. The results show that the non-deformable SiC
particulates have a strong influence on the formation of extrusion textures in thematrix. Pure
Al and 6061 alloy develop a typical β fibre texture after extrusion in strip shape. For 6061/SiCp
nanocomposites, the intensities ofmajor texture components decreasewith increasing amount
of SiC particles. The total intensities of Brass, Dillamore and S components have decreased by
19% for 6061/10 wt.% SiCp and 40% for 6061/15 wt.% SiCp composites when compared with the
6061 alloy. EBSD analysis on local grain orientations shows limited Al grain rotations in SiC rich
zones and decreased texture intensities.