Sustainable production of actinobacteria for use in bioremediation

COSTA GUTIERREZ, STEFANIE BERNARDETTE; BENIMELI, CLAUDIA SUSANA; SINELI, PEDRO EUGENIO; APARICIO, JUAN DANIEL; POLTI, MARTA ALEJANDRA

Salta

Congreso; Joint LV Annual SAIB Meeting and XIV PABMB conference; 2019

Pollution by pesticides and heavy metals is an environmental problem which strongly has concerned the scientific community in the last decades. Although great advances have been made in this area, there are relatively few successful treatments for restoration of polluted environments nowadays. One promising solution is bioremediation by bacteria, especially actinobacteria, because they are ubiquitous and have a wide spectrum of activities. It is estimated that 40 Kg of microbial biomass are required to decontaminate one hectare of soil in situ. Therefore, it is necessary to develop a sustainable process that allows the generation of a large amount of biomass using low-cost substrates. Biofuels, such as biodiesel and bioethanol, are renewable and environmentally friendly alternatives to fossil fuels. Biodiesel is produced by the transesterification of vegetable oils, animal fats or microbial oils with alcohol, being glycerol the main product, which represents 10% of its weight. Although glycerol is used for different applications, the increasing production of biodiesel in the world causes an excess of this material. Hence, glycerol can be used as a substrate to obtain products with high added value. In the present work, four actinobacteria with known bioremediation activity (Streptomyces sp. M7, Streptomyces sp. MC1, Streptomyces sp. A5 and Amycolatopsis tucumanensis AB0) were evaluated for the production of biomass at laboratory scale, using glycerol as a source of carbon and energy in liquid minimal medium (30 ml). Biomass production was measured by dry weight, and residual glycerol concentration was determined using a commercial kit. Streptomyces sp. A5 was able to produce the greatest amount of biomass and it was selected to evaluate the influence of culture parameters through a two-level fractional factorial design which allowed studying the main effects of the involved factors. From this design, the variables with the greatest effect on the response (biomass g/L) were selected. The factors evaluated were: inoculum concentration, glycerol concentration, agitation, temperature and pH. Subsequently, in order to optimize the biomass production of the actinobacteria, a complete factorial design was carried out by selecting the most important factors previously determined. The simple effects and cross effects were studied, and a response surface design was applied to adjust the model and optimize the microbial biomass production. All factorial designs were made and analyzed using the statistical software Minitab® 17.2.1. Finally, the selected conditions will be used for biomass production of Streptomyces sp. A5 in a greater scale instrumented bioreactor of 2 L capacity.