POST-MORTEM ANALYSIS OF ALUMINA-MAGNESIA-CARBON REFRACTORY BRICKS USED IN STEELMAKING LADLES

CALVO, WALTER A.; PENA, PILAR; TOMBA MARTINEZ, ANALÍA. G.

CERAMICS INTERNATIONAL

ELSEVIER SCI LTD

Año: 2019 vol. 45 p. 185 - 196

0272-8842

Post-mortem studies in secondary steelmaking ladles are an important way to determine the factors related to Alumina-Magnesia-Carbon (AMC) refractory corrosion. AMC refractory bricks installed in the impact zone of a steelmaking ladle bottom were analyzed after 100 castings. X-ray diffraction, X-ray fluorescence chemical analysis, reflected optical light microscopy, scanning electron microscopy, energy dispersive X-ray spectrometry, density and porosity measurements, and mercury porosimetry were used to analyze the chemical and physical characteristics of the slag, the unused refractory and the slag+steel attacked bricks. The corrosion process produced a specific microstructure characterized by:i) a thick discontinuous slag layer composed by secondary spinel+steel+liquid;ii) a thick dense, cracked, and continuous layer consisting of calcium aluminates+steel+liquid at the slag/refractory interface;iii) next to this layer, a wide densified layer with a uniform microstructure in which corundum aggregates and spinel crystals were linked together by elongated CaAl12O19 crystals. The formation of these reaction layers constituted a barrier that effectively suppressed massive slag penetration and surely reduced the wear rate. Thermodynamic calculations based on simplified and complex condensed phase equilibrium diagrams, were used to further understanding of the corrosion mechanism.