INVESTIGADORES
MARCOVICH norma Esther
congresos y reuniones científicas
Título:
Alginate microspheres containing thyme essential oil
Autor/es:
G. RIVERO; MARÍA R. ANSORENA; NORMA E. MARCOVICH; MARIANA PEREDA
Lugar:
Rio de Janeiro
Reunión:
Conferencia; Fifth international Conference on Natural Polymers and Biomaterials, ICNP 2017 Rio; 2017
Resumen:
Oil/water (o/w) emulsions were prepared by dispersing thyme essential oil into an alginate solution containing 1% (w/v) of Tween 80® 2-4 by magnetic stirring and homogenization.Different homogenization conditions (time and speed) and oil contents were used. The obtained emulsions were in some cases sonicated (0-30 minutes) after the homogenization process. The final emulsions were characterized by using optical microscopy in order to analyze the size distribution of the oil droplets and their stability as a function of time.Results show that the reduction in 75% of the oil content gives smaller and well dispersed droplets. As expected, increasing the homogenization speed also decreased the droplet diameter though certain agglomerations were detected. Further reduction in droplets sizes was found when sonication was applied, leading to much more narrow distribution sizes as the sonication time increases. Moreover, sonication resulted in more stable emulsions in time. The capsules were prepared by the simple extrusion technique by forming droplets in the CaCl2 gelling solution. Dripping was done by using a syringe to inject 2 ml of the AL/oil emulsion in 15 ml of 0.5% w/w of CaCl2 solution (pre-prepared) with continuous stirring at 200 rpm to avoid the coalescence of the pearls. After 15 minutes of gelation, the spherical capsules were collected, filtered, washed with distilled water to avoid external gelation, freeze-dried and characterized microscopically by scanning electron microscopy (SEM). In all cases, the resulting capsules exhibited asymmetrical shapes with similar sizes. No significant differences in the final capsules morphology were detected after the freeze-drying step. However, the washing step was critical to avoid remaining materials on the surface that led to unsmooth capsules.