EFFECT OF TWO DIFFERENT PLASTICIZERS ON THE PROPERTIES OF POLY(3- HYDROXYBUTYRATE) BINARY AND TERNARY BLENDS

I. T. SEOANE; L. B. MANFREDI; V. P. CYRAS

JOURNAL OF APPLIED POLYMER SCIENCE

JOHN WILEY & SONS INC

Año: 2018 vol. 135 p. 46016 - 46016

0021-8995

Plasticized Poly(3-hydroxybutyrate) (PHB) films were obtained by solvent casting. The effects of two different additives on several properties of PHB have been examined, utilizing tributyrin (TB)and poly[di(ethyleneglycol) adipate] (A). Based on changes in the glass transition temperature (Tg)and cold crystallization temperature of host PHB, the two components are miscible with PHB and they can act as plasticizers. Binary and ternary blends were obtained by adding both plasticizers separately or together, respectively. The effect of plasticizer addition on the optical transparency,water vapor permeability (WVP) and tensile properties of the films was studied. It was found that the blends remain transparent and WVP was maintained constant until a 20wt% of plasticizer content.Plasticizing effect was corroborated and it depended on the plasticizer percentage. Binary blends had an increased plasticity, in concordance with Tg diminution of PHB. Although ternary blends presented Tg diminution, mechanical properties were not improved probably due to strong interactions between plasticizers. Finally, binary and ternary blends presented enhanced properties,causing an increment on processability. A correct knowledge between the formulation of the film and the role played by each component could allow getting custom films.