ROSSI, N.; MÉNDEZ, C.G.; HUESPE, A.E.

Surrogate model for a mechanical metamaterial undergoing microstructure instabilities and phase transformations

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES; Año: 2023 vol. 243

FORZANI, L.; MENDEZ, C.G.; URTEAGA, R.; HUESPE, A.E.

Porous silicon opto-acoustic detector for ternary gas mixture

ULTRASONICS; Año: 2023 vol. 135

ZAMBRANO, J.; S. TORO; P.J SÁNCHEZ; DUDA, F.P.; MENDEZ, CARLOS GUSTAVO; A E. HUESPE

An arc-length control technique for solving quasi-static fracture problems with phase field models and a staggered scheme

COMPUTATIONAL MECHANICS; Lugar: Berlin; Año: 2023

ZAMBRANO, J.; TORO, S.; SÁNCHEZ, P.J.; DUDA, F.P.; MÉNDEZ, C.G.; HUESPE, A.E.

Interaction analysis between a propagating crack and an interface: Phase field and cohesive surface models

INTERNATIONAL JOURNAL OF PLASTICITY; Año: 2022 vol. 156

NUÑEZ-LABIELLE, A.; CANTE, J.; HUESPE, A.E.; OLIVER, J.

Towards shock absorbing hyperelastic metamaterial design. (I) Macroscopic scale: Computational shock-capturing

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING; Año: 2022 vol. 393

RASCHI, MARCELO; LLOBERAS-VALLS, ORIOL; HUESPE, ALFREDO; OLIVER, JAVIER

High performance reduction technique for multiscale finite element modeling (HPR-FE2): Towards industrial multiscale FE software

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING; Año: 2021 vol. 375

POLO, MARA L.; SPONTÓN, MARISA E.; HUESPE, ALFREDO; ESTENOZ, DIANA A.; MEIRA, GREGORIO R.

Linear segmented polyurethanes. III. Mathematical model for a two-steps polymerization

JOURNAL OF APPLIED POLYMER SCIENCE; Año: 2021

ROLANDO YERA; FORZANI, L.; MÉNDEZ, CARLOS G.; A E. HUESPE

A topology optimization algorithm based on topological derivative and level-set function for designing phononic crystals

ENGINEERING COMPUTATIONS; Año: 2021

FORZANI, L.; MENDEZ, C.G.; URTEAGA, R.; HUESPE, A.E.

Design and optimization of an opto-acoustic sensor based on porous silicon phoxonic crystals

SENSORS AND ACTUATORS A-PHYSICAL; Año: 2021

ROSSI, NESTOR; PODESTÁ, JUAN M.; BRE, FACUNDO; MÉNDEZ, CARLOS G.; HUESPE, ALFREDO E.

A microarchitecture design methodology to achieve extreme isotropic elastic properties of composites based on crystal symmetries

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION; Año: 2021

ROLANDO YERA; MÉNDEZ, CARLOS G.; P.J. SÁNCHEZ; A E. HUESPE

Effective properties of periodic media in elastodynamic problems

Computer Methods in Materials Science; Lugar: Varsovia; Año: 2021 vol. 21 p. 1 - 10

ROSSI, N.; YERA, R.; MÉNDEZ, C.G.; TORO, S.; HUESPE, A.E.

Numerical technique for the 3D microarchitecture design of elastic composites inspired by crystal symmetries

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING; Año: 2020 vol. 359

YERA, R.; ROSSI, N.; MÉNDEZ, C.G.; HUESPE, A.E.

Topology design of 2D and 3D elastic material microarchitectures with crystal symmetries displaying isotropic properties close to their theoretical limits

Applied Materials Today; Lugar: Lobndres; Año: 2020 vol. 18

MENDEZ, CARLOS GUSTAVO; PODESTA, JUAN MANUEL; TORO, SEBASTIAN; HUESPE, ALFREDO; OLIVER, XAVIER

Making use of Symmetries in the 3D Elastic Inverse Homogenization Problem

INTERNATIONAL JOURNAL FOR MULTISCALE COMPUTATIONAL ENGINEERING; Año: 2019 vol. 17 p. 261 - 280

CAICEDO, MANUEL; MROGINSKI, JAVIER L.; TORO, SEBASTIAN; RASCHI, MARCELO; HUESPE, ALFREDO; OLIVER, JAVIER

High Performance Reduced Order Modeling Techniques Based on Optimal Energy Quadrature: Application to Geometrically Non-linear Multiscale Inelastic Material Modeling

ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING; Año: 2019 vol. 26 p. 771 - 792

PODESTÁ, J.M.; MÉNDEZ, C.M.; TORO, S.; HUESPE, A.E.

Symmetry considerations for topology design in the elastic inverse homogenization problem

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS; Año: 2019 vol. 128 p. 54 - 78

DUDA, F.P.; CIARBONETTI, A.; TORO, S.; HUESPE, A.E.

A phase-field model for solute-assisted brittle fracture in elastic-plastic solids

INTERNATIONAL JOURNAL OF PLASTICITY; Año: 2018 vol. 102 p. 16 - 40

PODESTÁ, J.M.; MÉNDEZ, C.G.; TORO, S.; HUESPE, A.E.; OLIVER, J.

Material design of elastic structures using Voronoi cells

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING; Año: 2018 vol. 115 p. 269 - 292

OLIVER, J.; CAICEDO, M.; HUESPE, A.E.; HERNÁNDEZ, J.A.; ROUBIN, E.

Reduced order modeling strategies for computational multiscale fracture

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING; Año: 2017 vol. 313 p. 560 - 595

MÉNDEZ, C.; PODESTÁ, J. M.; LLOBERAS-VALLS, O.; TORO, S.; HUESPE, A. E.; OLIVER, J.

Computational material design for acoustic cloaking

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING; Año: 2017 vol. 112 p. 1353 - 1380

BURCZY?SKI, TADEUSZ; OLIVER, XAVIER; PIETRZYK, MACIEJ; HUESPE, ALFREDO

Preface: Multiscale modelling of materials and structures, PT. I

INTERNATIONAL JOURNAL FOR MULTISCALE COMPUTATIONAL ENGINEERING; Lugar: Londres; Año: 2017 vol. 15 p. 1 - 1

LLOVEAS-VALS O.; A E. HUESPE; J. OLIVER,; DIAS I.

Strain injection techniques in dynamic fracture modeling

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING; Lugar: Amsterdam; Año: 2016 vol. 308 p. 499 - 534

CAICEDO, M.; OLIVER, J.; HUESPE, A.E.; LLOBERAS-VALLS, O.

Model order reduction in computational multiscale fracture mechanics

KEY ENGINEERING MATERIALS; Año: 2016 vol. 713 p. 248 - 253

TORO, S.; SáNCHEZ, P.J.; PODESTá, J.M.; BLANCO, P.J.; HUESPE, A.E.; FEIJóO, R.A.

Cohesive surface model for fracture based on a two-scale formulation: computational implementation aspects

COMPUTATIONAL MECHANICS; Año: 2016 vol. 58 p. 549 - 585

S TORO; P.J SÁNCHEZ; P.J. BLANCO; E. SOUZA NETO; A E. HUESPE; R. A. FEIJÓO

Multiscale formulation for material failure accounting for cohesive cracks at the macro and micro scales

INTERNATIONAL JOURNAL OF PLASTICITY; Lugar: Amsterdam; Año: 2016 vol. 76 p. 75 - 110

F.P. DUDA; A. CIARBONETTI; P.J. SÁNCHEZ; A.E. HUESPE

A phase-field/gradient damage model for brittle fracture in elastic?plastic solids

INTERNATIONAL JOURNAL OF PLASTICITY; Lugar: Amsterdam; Año: 2015 vol. 65 p. 269 - 296

FACHINOTTI V; S. TORO; P.J SÁNCHEZ; A. E. HUESPE

Sensitivity of the thermomechanical response of elastic structures to microstructural changes

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES; Lugar: Amsterdam; Año: 2015 vol. 69 p. 45 - 59

J. OLIVER,; M. CAICEDO; E. ROUBIN; A E. HUESPE

Continuum approach to computational multi-scale modeling of fracture

KEY ENGINEERING MATERIALS; Año: 2015 vol. 627 p. 349 - 352

J. OLIVER,; M. CAICEDO; E. ROUBIN; A E. HUESPE; J HERNANDEZ

Continuum Approach to Computational Multiscale Modeling of Propagating Fracture

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING; Lugar: Amsterdam; Año: 2015 vol. 294 p. 384 - 427

S TORO; P.J SÁNCHEZ; A E. HUESPE; S. GIUSTI; P.J. BLANCO; R. A. FEIJÓO

A two-scale failure model for heterogeneous materials: numerical implementation based on the Finite Element Method

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING; Lugar: Londres; Año: 2014 vol. 97 p. 313 - 351

J. OLIVER,; DIAS I.; A E. HUESPE

Crack-path field and strain-injection techniques in computational modeling of propagating material failure

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING; Lugar: Amsterdam; Año: 2014 vol. 274 p. 289 - 348

J HERNANDEZ; J. OLIVER,; A E. HUESPE; M. CAICEDO; J.C. CANTE

High-performance model reduction techniques in computational multiscale homogenization

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING; Lugar: Amsterdam; Año: 2014 vol. 276 p. 149 - 189

A E. HUESPE; J. OLIVER,; D.F. MORA

Computational modeling of high performance steel fiber reinforced concrete using a micromorphic approach

COMPUTATIONAL MECHANICS; Lugar: Berlin; Año: 2013 vol. 52 p. 1243 - 1264

P.J. SÁNCHEZ; PJ. BLANCO; A.E. HUESPE; R. FEIJÓO

A Failure-Oriented Multi-Scale Variational Formulation: micro-structures with nucleation of softening bands

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING; Lugar: Amsterdam; Año: 2013 vol. 257 p. 221 - 247

CAVACO E.; CASAS J.R.; NEVES L.A.C.; A E. HUESPE

Robustness of corroded reinforced concrete structures ? a structural performance approach

STRUCTURE AND INFRASTRUCTURE ENGINEERING; Año: 2013 vol. 9 p. 42 - 58

A.E. HUESPE, A. NEEDLEMAN, J. OLIVER, P.J. SANCHEZ

A finite strain, finite band method for modeling ductile fracture

INTERNATIONAL JOURNAL OF PLASTICITY; Año: 2012 vol. 28 p. 53 - 69

J. OLIVER,; A.E. HUESPE; I. DIAS

Strain localization, strong discontinuities and material fracture: Matches and mismatches

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING; Lugar: Amsterdam; Año: 2012 vol. 241 p. 323 - 336

J. OLIVER,; D.F. MORA; A.E HUESPE; R. WEYLER

A micromorphic model for steel fiber reinforced concrete

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES; Lugar: Amsterdam; Año: 2012 vol. 49 p. 2990 - 3007

P.J SÁNCHEZ; A E. HUESPE; J. OLIVER,; G. DIAZ,; V. SONZOGNI

A macroscopic damage-plastic constitutive law for modeling quasi-brittle fracture and ductile behavior of concrete

INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS; Año: 2012 vol. 36 p. 546 - 573

D.L LINERO, J. OLIVER, A.E. HUESPE

Numerical modeling of the fracture process in reinforced concrete by means of the continuum strong discontinuity approach. Part I: formulation

INGENIERíA E INVESTIGACIóN; Año: 2010 vol. 30 p. 5 - 15

D.L. LINERO SEGRERA, J. OLIVER, A.E. HUESPE

Numerical modelling of the fracture process in reinforced concrete by means of a continuum strong discontinuity approach. Part II: application to shear panels

INGENIERíA E INVESTIGACIóN; Año: 2010 vol. 30 p. 16 - 26

P.J. SÁNCHEZ; A.E. HUESPE; J. OLIVER; S. TORO

Mesoscopic model to simulate the mechanical behavior of reinforced concrete members affected by corrosion

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES; Año: 2010 vol. 47 p. 559 - 570

J. OLIVER; A. E. HUESPE; J. C. CANTE; G. DIAZ

On the numerical resolution of the discontinuous material bifurcation problem

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING; Año: 2010 vol. 83 p. 786 - 804

A.E. HUESPE; A. NEEDLEMAN,; J. OLIVER,; P. J. SANCHEZ

A finite thickness band method for ductile fracture analysis

INTERNATIONAL JOURNAL OF PLASTICITY; Año: 2009 vol. 25 p. 2349 - 2365

O. L. MANZOLI, J. OLIVER, A.E. HUESPE, G. DIAZ

A mixture theory based method for three-dimensional modeling of reinforced concrete members with embedded crack finite elements

Computers & Concrete; Año: 2008 vol. 5 p. 401 - 416

O. L. MANZOLI,; J. OLIVER,; G. DIAZ, ; A.E. HUESPE

Análise tridimensional de elementos estruturais de concreto armado via elementos finitos com descontinuidades incorporadas

IBRACON Structures and Materials Journal – RIEM; Lugar: San Pablo; Año: 2008 vol. 1 p. 58 - 70

P.J. SÁNCHEZ, A.E. HUESPE, J. OLIVER

On some topics for the numerical simulation of ductile fracture

INTERNATIONAL JOURNAL OF PLASTICITY; Año: 2008 vol. 24 p. 1008 - 1038

J. OLIVER; LINERO, D.L.; A E. HUESPE; O. MANZOLI

Two-dimensional modeling of material failure in reinforced concrete by means of a continuum strong discontinuity approach

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING; Año: 2008 vol. 197 p. 332 - 348

M. PAPADRAKAKIS; PAPADOPOULUS V.; LAGAROS N.D.; J. OLIVER,; A E. HUESPE; P. J. SANCHEZ

Vulnerability Analysis of Large Concrete Dams using the Continuum Strong Discontinuity Approach and Neural Networks

STRUCTURAL SAFETY; Año: 2008 vol. 30 p. 217 - 235

J. OLIVER,; A E. HUESPE; J.C. CANTE

An implicit/explicit integration scheme to increase computability of non-linear material and contact/friction problems

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING; Año: 2008 vol. 197 p. 1865 - 1889

P.J. SÁNCHEZ; V. SONZOGNI; A.E. HUESPE

Study of a stabilized mixed finite element with emphasis on its numerical performance for strain localization problems

COMMUNICATIONS IN NUMERICAL METHODS IN ENGINEERING; Año: 2008 vol. 24 p. 297 - 320

RISSO J.M., HUESPE A.E., CARDONA A.

Thermal stress evaluation in the steel continuous casting process

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING; Año: 2006 vol. 65 p. 1355 - 1377

J. OLIVER, A.E. HUESPE, S. BLANCO AND D.L. LINERO

Stability and robustness issues in numerical modeling of material failure in the strong discontinuity approach

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING; Año: 2006 vol. 195 p. 7093 - 7114

A.E HUESPE, J. OLIVER, M.D.G. PULIDO, S. BLANCO, D.L. LINERO

On the fracture models determined by the continuum-strong discontinuity approach

INTERNATIONAL JOURNAL OF FRACTURE; Año: 2006 vol. 137 p. 211 - 229

J. OLIVER, A.E. HUESPE, P.J. SÁNCHEZ

A comparative study on finite elements for capturing strong discontinuities: E-FEM vs. X-FEM

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING; Año: 2006 vol. 195 p. 4732 - 4752

P.J. SÁNCHEZ, V. SONZOGNI, A.E. HUESPE, J. OLIVER

Stabilized Mixed Finite Elements With Embedded Strong Discontinuities for Shear Band Modeling

JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME; Año: 2006 vol. 73 p. 995 - 1004

J. OLIVER; A.E HUESPE

Theoretical and computational issues in modeling material failure in strong discontinuity scenerios

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING; Año: 2004 vol. 193 p. 2987 - 3014

J. OLIVER; A.E HUESPE; M.D.G. PULIDO; S. BLANCO

Computational modeling of cracking of concrete in strong discontinuity settings

COMPUTERS AND CONCRETE; Año: 2004 vol. 1 p. 61 - 76

J. OLIVER; A.E HUESPE

Continuum approach to material failure in strong discontinuity settings

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING; Año: 2004 vol. 193 p. 3195 - 3220

J. OLIVER; A.E HUESPE; E. SAMANIEGO; E. CHAVES

A continuum approach to the numerical simulation of material failure in geomaterials

INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS; Año: 2004 vol. 28 p. 609 - 632

J. OLIVER; A.E HUESPE; M.D.G. PULIDO; E. SAMANIEGO

On the strong discontinuity approach in finite deformation settings

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING; Año: 2003 vol. 56 p. 1051 - 1082

J. OLIVER; A.E HUESPE; E. SAMANIEGO

A study on finite elements for capturing strong discontinuities

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING; Año: 2003 vol. 56 p. 2135 - 2161

J. OLIVER; A.E HUESPE; M.D.G. PULIDO; E. CHAVES

From continuum mechanics to fracture mechanics: the strong discontinuity approach

ENGINEERING FRACTURE MECHANICS; Año: 2002 vol. 69 p. 113 - 136

NIGRO N.; A.E HUESPE; FACHINOTTI V.

Phasewise numerical integration of inite element method applied to solidification processes

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER; Año: 2000 vol. 43 p. 1053 - 1066

A.E HUESPE; A. CARDONA; FACHINOTTI V.

Thermomechanical model of a continuous casting process

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING; Año: 2000 vol. 182 p. 439 - 455

A.E HUESPE; A. CARDONA; NIGRO N.; FACHINOTTI V.

Visco-plastic constitutive models of steel at high temperature

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY; Año: 2000 vol. 102 p. 143 - 152

A. CARDONA; A.E HUESPE

Evaluation of simple bifurcation points and post-critical path in large finite rotation problems

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING; Año: 1999 vol. 175 p. 137 - 156

FACHINOTTI V.; A. CARDONA; A.E HUESPE

A FAST CONVERGENT AND ACCURATE TEMPERATURE MODEL FOR PHASE-CHANGE HEAT CONDUCTION

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING; Año: 1999 vol. 44 p. 1863 - 1884