CAPURRO, CONSTANTINO; BOERI, ROBERTO; CICUTTI, CARLOS

Characterization of Nonmetallic Inclusions of Al-Killed Ca-Treated Steels by Automated SEM/EDS and Its Application to Industrial Case Studies

STEEL RESEARCH INTERNATIONAL; Año: 2022 vol. 93

POLISERPI, MARIANA; PERE BARRIOBERO-VILA; GUILLERMO REQUENA; LAURA NOEL GARCIA; ALFREDO TOLLEY; CECILIA POLETTI; TOMAS VOJTEK; ADAM WEISER; NORBERT SCHELL; ANDREAS STARK; ROBERTO E BOERI; SOMMADOSSI, SILVANA

TEM and Synchrotron X-ray Study of the Evolution of Phases Formed During Bonding of IN718/Al/IN718 Couples by TLPB

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE; Lugar: Berlin; Año: 2021 vol. 52 p. 1382 - 1394

TENAGLIA, NICOLÁS E.; MASSONE, JUAN M.; BASSO, ALEJANDRO D.; BOERI, ROBERTO E.

Influence of the Austempering Time on the Mechanical Properties of Carbide-Free Bainitic Cast Steels

INTERNATIONAL JOURNAL OF METALCASTING; Año: 2021 vol. 15 p. 906 - 915

FERNANDINO, DIEGO O.; DAGA, BERNARDO; BOERI, ROBERTO E.

Micromechanical characterization of ferritic ductile cast iron by using instrumented indentation and atomic force microscopy

Material Design and Processing Communications; Año: 2021 vol. 3

POLISERPI, MARIANA; BUZOLIN, RICARDO; BOERI, ROBERTO ENRIQUE; POLETTI, CECILIA; SOMMADOSSI, SILVANA

Microstructure Evolution and Phase Identification in Ni-Based Superalloy Bonded by Transient Liquid Phase Bonding

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE; Lugar: Berlin; Año: 2021 vol. 52 p. 1695 - 1707

POLISERPI, MARIANA; BARRIOBERO-VILA, PERE; REQUENA, GUILLERMO; GARCÍA, LAURA NOEL; TOLLEY, ALFREDO; POLETTI, CECILIA; VOJTEK, TOMÁ; WEISER, ADAM; SCHELL, NORBERT; STARK, ANDREAS; BOERI, ROBERTO; SOMMADOSSI, SILVANA

TEM and Synchrotron X-ray Study of the Evolution of Phases Formed During Bonding of IN718/Al/IN718 Couples by TLPB

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE; Año: 2021 vol. 52 p. 1382 - 1394

FERNANDINO, DIEGO O.; LÓPEZ, MARCOS G.; BOERI, ROBERTO E.; MASSONE, JUAN M.

Influence of Microshrinkage Cavities on the Plastic Deformation and Fracture Under Tensile Loading in Ferritic Ductile Iron

INTERNATIONAL JOURNAL OF METALCASTING; Año: 2021 vol. 15 p. 1084 - 1090

GARCÍA, LAURA N.; MAGNABOSCO, RODRIGO; BOERI, ROBERTO E.; TOLLEY, ALFREDO J.; SAAVEDRA, MARCELA E.

Formation of Cu-rich Nanoprecipitates in Cu Containing Pearlitic SGI

INTERNATIONAL JOURNAL OF METALCASTING; Año: 2021 vol. 15 p. 1164 - 1174

LÓPEZ, MARCOS G.; MASSONE, JUAN M.; BOERI, ROBERTO E.

An integrated approach for the characterization of the solidification structure of free graphite cast irons Ein integrierter ansatz zur charakterisierung der erstarrungsstruktur von gusseisen mit freiem graphit

PRAKTISCHE METALLOGRAPHIE; Año: 2020 vol. 57 p. 672 - 687

TENAGLIA, NICOLÁS EMANUEL; BOERI, ROBERTO ENRIQUE; BASSO, ALEJANDRO DANIEL

Mechanical properties of a carbide-free bainitic cast steel with dispersed free ferrite

MATERIALS SCIENCE AND TECHNOLOGY; Año: 2020 vol. 36 p. 108 - 117

FERNANDINO, DIEGO O.; DI COCCO, VITTORIO; BOERI, ROBERTO E.; IACOVIELLO, FRANCESCO

Microstrain measurements and damage analysis during tensile loading of intercritical austempered ductile iron

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (PRINT); Año: 2020

FERNANDINO, D.O.; TENAGLIA, N.; BOERI, R.E.; DI COCCO, V.; BELLINI, C.; IACOVIELLO, F.

Microstructural damage evaluation of ferritic-ausferritic spheroidal graphite cast iron

Frattura ed Integrita Strutturale; Año: 2020 vol. 14 p. 477 - 485

GARCÍA, LAURA NOEL; CARAZO, FERNANDO DIEGO; BOERI, ROBERTO ENRIQUE

Ferrite Growth During Cooling Through the Ferrite-Austenite-Graphite Field in SGI

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE; Año: 2020 vol. 51 p. 631 - 637

FERNANDINO, DIEGO O.; BOERI, ROBERTO E.; DI COCCO, VITTORIO; BELLINI, COSTANZO; IACOVIELLO, FRANCESCO

Damage evolution during tensile test of austempered ductile iron partially austenized

Material Design & Processing Communications; Año: 2020 vol. 2

LÓPEZ, MARCOS G.; MASSONE, JUAN M.; BOERI, ROBERTO E.

Examination of the Size and Morphology of Austenite Grains in Lamellar Graphite Cast Iron

INTERNATIONAL JOURNAL OF METALCASTING; Año: 2020 vol. 14 p. 689 - 695

POLISERPI, MARIANA; BUZOLIN, RICARDO; BOERI, ROBERTO; POLETTI, CECILIA; SOMMADOSSI, SILVANA

Analysis of Splitting and Martensitic Transformation of AlNi Intermetallic Obtained by Transient Liquid Phase Bonding

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE; Año: 2020 vol. 51 p. 916 - 924

FERNANDINO, D.O.; TENAGLIA, N.; DI COCCO, V.; BOERI, R.E.; IACOVIELLO, F.

Relation between microstructural heterogeneities and damage mechanisms of a ferritic spheroidal graphite cast iron during tensile loading

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (PRINT); Año: 2020 vol. 43 p. 1262 - 1273

TENAGLIA, NICOLÁS EMANUEL; PEDRO, DIEGO IVÁN; BOERI, ROBERTO ENRIQUE; BASSO, ALEJANDRO DANIEL

Influence of silicon content on mechanical properties of IADI obtained from as cast microstructures

INTERNATIONAL JOURNAL OF CAST METALS RESEARCH; Año: 2020 vol. 33 p. 72 - 79

TENAGLIA, NICOLÁS E.; MASSONE, JUAN M.; BOERI, ROBERTO E.; SPEER, JOHN G.

Effect of microsegregation on carbide-free bainitic transformation in a high-silicon cast steel

MATERIALS SCIENCE AND TECHNOLOGY; Año: 2020 vol. 36 p. 690 - 698

BOERI, ROBERTO E.; LÓPEZ, MARCOS G.; TENAGLIA, NICOLÁS E.; MASSONE, JUAN M.

Solidification, Macrostructure and Shrinkage Formation of Ductile and Compacted Irons

INTERNATIONAL JOURNAL OF METALCASTING; Año: 2020

TENAGLIA, NICOLÁS E.; MASSONE, JUAN M.; BASSO, ALEJANDRO D.; BOERI, ROBERTO E.

Influence of the Austempering Time on the Mechanical Properties of Carbide-Free Bainitic Cast Steels

INTERNATIONAL JOURNAL OF METALCASTING; Año: 2020

TENAGLIA, NICOLÁS EMANUEL; BASSO, ALEJANDRO; MASSONE, JUAN; BOERI, ROBERTO

Development of ultra-high strength carbide-free bainitic cast steels

INTERNATIONAL JOURNAL OF CAST METALS RESEARCH; Año: 2020 vol. 33 p. 258 - 265

LÓPEZ, MARCOS G.; MASSONE, JUAN M.; BOERI, ROBERTO E.

An integrated approach for the characterization of the solidification structure of free graphite cast irons Ein integrierter ansatz zur charakterisierung der erstarrungsstruktur von gusseisen mit freiem graphit

PRAKTISCHE METALLOGRAPHIE; Año: 2020 vol. 57 p. 672 - 687

FERNANDINO, DIEGO O.; BOERI, ROBERTO E.

In-situ microscopic analysis of ferritic ductile iron during tensile loading: Relation between matrix heterogeneities and damage mechanisms

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (PRINT); Año: 2019 vol. 42 p. 2220 - 2231

LÓPEZ, MARCOS G.; BREWER, LUKE N.; MASSONE, JUAN M.; BOERI, ROBERTO E.

EBSD Analysis of the Primary Austenite Grains in Lamellar Graphite Cast Iron

Metallography, Microstructure, and Analysis; Año: 2019 vol. 8 p. 386 - 392

GARCÍA, LAURA N.; TOLLEY, ALFREDO J.; CARAZO, FERNANDO D.; BOERI, ROBERTO E.

Identification of Cu-rich precipitates in pearlitic spheroidal graphite cast irons

MATERIALS SCIENCE AND TECHNOLOGY; Lugar: London; Año: 2019 vol. 35 p. 2252 - 2258

GARCÍA, LAURA NOEL; CARAZO, FERNANDO DIEGO; BOERI, ROBERTO ENRIQUE

About Equilibrium Mode Ruling Ferritic Transformation in Low-Alloy SGI

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE; Año: 2019 vol. 50 p. 5585 - 5593

LÓPEZ, MARCOS; MASSONE, JUAN M.; BOERI, ROBERTO ENRIQUE

Evolution of the macrostructure of gray cast iron from eutectic to hypereutectic composition

MATERIALS SCIENCE FORUM; Año: 2018 vol. 925 p. 110 - 117

FERNANDINO, DIEGO O.; BOERI, ROBERTO E.; MASSONE, JUAN M.

Mechanism of damage of ferritic ductile Iron, influence of matrix heterogeneity

MATERIALS SCIENCE FORUM; Año: 2018 vol. 925 p. 288 - 295

TENAGLIA, NICOLÁS EMANUEL; BOERI, ROBERTO ENRIQUE; MASSONE, JUAN MIGUEL; BASSO, ALEJANDRO DANIEL

Assessment of the austemperability of high-silicon cast steels through Jominy hardenability tests

MATERIALS SCIENCE AND TECHNOLOGY; Año: 2018 p. 1 - 11

TENAGLIA, NICOLÁS EMANUEL; RIVAS, ANA LUISA; BOERI, ROBERTO ENRIQUE; MASSONE, JUAN MIGUEL; BASSO, ALEJANDRO DANIEL

Study of austempering kinetics of high silicon bainitic cast steels

INTERNATIONAL JOURNAL OF CAST METALS RESEARCH; Año: 2018

TENAGLIA, NICOLÁS E.; BOERI, ROBERTO E.; BASSO, ALEJANDRO D.; MASSONE, JUAN M.

Macro and microstructural characterisation of high Si cast steels;Study of microsegregation patterns

INTERNATIONAL JOURNAL OF CAST METALS RESEARCH; Año: 2017 vol. 30 p. 103 - 111

TENAGLIA, NICOLÁS; BOERI, ROBERTO ENRIQUE; RIVERA, GRACIELA LEONOR; MASSONE, JUAN MIGUEL

Study of shrinkage porosity in spheroidal graphite cast iron

INTERNATIONAL JOURNAL OF CAST METALS RESEARCH; Lugar: London; Año: 2016 vol. 29 p. 112 - 120

SOSA, AMADEO DANIEL; ROSALES, CAREN; BOERI, ROBERTO ENRIQUE; SIMISON, SILVIA NOEMI

Corrosion Mechanisms in ADI parts

INTERNATIONAL JOURNAL OF CAST METALS RESEARCH; Lugar: London; Año: 2016 vol. 29 p. 106 - 111

FERNANDINO, DIEGO OMAR; BOERI, ROBERTO ENRIQUE

Fractographic Analysis of Austempered Ductile Iron

Fatigue and Fracture of Engineering Materials and Structures; Año: 2016 vol. 39 p. 583 - 598

LÓPEZ, MARCOS G.; RIVERA, GRACIELA L.; MASSONE, JUAN M.; BOERI, ROBERTO E.

Study of the solidification structure of compacted graphite cast iron

INTERNATIONAL JOURNAL OF CAST METALS RESEARCH; Año: 2016 vol. 29 p. 266 - 271

DIEGO FERNANDINO; ROBERTO BOERI

Fracture of pearlitic ductile cast iron under different loading conditions

Fatigue and Fracture of Engineering Materials and structures; Año: 2015 vol. 38 p. 80 - 90

DIEGO FERNANDINO; ADRIAN CISILINO; ROBERTO BOERI

Determination of Effective Elastic Properties of Ferritic Ductile Cast Iron by Computational Homogenization, Micrography and Microindentation Tests

MECHANICS OF MATERIALS; Lugar: Amsterdam; Año: 2015 vol. 83 p. 110 - 121

FERNANDINO, D.O.; BOERI, R.

Study of the fracture of ferritic ductile cast iron under different loading conditions

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (PRINT); Año: 2015 vol. 38 p. 610 - 620

DIEGO FERNANDINO; ROBERTO BOERI

Study of the fracture of ferritic ductile cast iron under different loading conditions

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (PRINT); Lugar: Londres; Año: 2014

ALEJANDRO BASSO; NICOLÁS TENAGLIA; ROBERTO BOERI; JUAN MASSONE

Influence of the chemical composition on the ausferritic transformation in carbide-free bainitic cast steel

MATERIALS SCIENCE FORUM; Año: 2014 vol. 793 p. 85 - 91

ROBERTO BOERI; RICARDO MARTÍNEZ

Embrittlement of ADI by contact with liquids: Influence of alloy content and preventive methods

MATERIALS SCIENCE AND TECHNOLOGY; Lugar: London; Año: 2013 vol. 29 p. 665 - 671

DIEGO FERNANDINO; JUAN MASSONE; ROBERTO BOERI

Characterization of the Austemperability of partially austenitized ductile iron

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY; Lugar: Amsterdam; Año: 2013 vol. 213 p. 1801 - 1809

MARTÍN CALDERA; RICARDO MARTÍNEZ; ROBERTO BOERI; JORGE SIKORA

Evaluation of water Embrittlement on Dual Phase ADI

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (PRINT); Lugar: Londres; Año: 2011 vol. 34 p. 774 - 781

JUAN MASSONE; ROBERTO BOERI

Failure of forklift forks

ENGINEERING FAILURE ANALYSIS; Año: 2010 vol. 17 p. 1062 - 1068

GRACIELA RIVERA; ROBERTO BOERI; JORGE SIKORA

Growth of eutectic austenite in free graphite cast irons

KEY ENGINEERING MATERIALS; Año: 2010 vol. 457 p. 67 - 72

SUSANA MONTECINOS; ADELA CUNIBERTI; M.L. CASTRO; ROBERTO BOERI

Phase transformations during continuous cooling of polycrystalline â-CuAlBe alloys

JOURNAL OF ALLOYS AND COMPOUNDS; Año: 2009 vol. 476 p. 278 - 283

PABLO DAVID; JUAN MASSONE; ROBERTO BOERI; JORGE SIKORA

Gating System Design to Cast thin Wall Ductile Iron

Foundry Trade Journal; Año: 2009 vol. 182 p. 119 - 126

GRACIELA RIVERA; PABLO CALVILLO; ROBERTO BOERI; YVAN HOUBAERT; JORGE SIKORA

Examination of the solidification macrostructure of spheroidal and flake graphite cast irons using DAAS ans ESBD

MATERIALS CHARACTERIZATION; Año: 2008 vol. 59 p. 1342 - 1348

D.J.CELENTANO; P.M. DARDATI; L.A. GODOY; R.E. BOERI

Computational Simulation of Microstructure Evolution during solidification of Ductile Cast Iron

INTERNATIONAL JOURNAL OF CAST METALS RESEARCH; Año: 2008 vol. 21 p. 416 - 426

BERNARDO DAGA; GRACIELA RIVERA; ROBERTO BOERI

Review of the regulations for the use of stainless steel for orthopedic implants in Argentina

Journal of Physics, Conference Series; Año: 2007 vol. 90 p. 1 - 6

PABLO DAVID; JUAN MASSONE; ROBERTO BOERI; JORGE SIKORA

Gating System Design To Cast Thin Wall Ductile Iron Plates

INTERNATIONAL JOURNAL OF CAST METALS RESEARCH; Lugar: London; Año: 2006 vol. 19 p. 98 - 109

CARLOS CICUTTI; ROBERTO BOERI

Analysis of solute distribution during the solidification of low alloyed steels

STEEL RESEARCH; Año: 2006 vol. 77 p. 194 - 201

JORGE SIKORA; ROBERTO BOERI

Advances in Ductile Iron Research: new metallurgical understanding and its technological significance

Archives of Foundry; Lugar: Kracow, Poland; Año: 2005 vol. 5 p. 354 - 360

MARTIN CALDERA; GRACIELA RIVERA; ROBERTO BOERI; JORGE SIKORA

Precipitation and dissolution of carbides in low alloy ductile iron plates of varied thickness

MATERIALS SCIENCE AND TECHNOLOGY; Año: 2005 vol. 21 p. 1187 - 1191

GRACIELA RIVERA; ROBERTO BOERI; JORGE SIKORA

Reply to comments on the solidification of gray cast iron

SCRIPTA MATERIALIA; Año: 2005 vol. 52 p. 251 - 252

GRACIELA RIVERA; ROBERTO BOERI; JORGE SIKORA

Solidification of Gray Cast Iron

SCRIPTA MATERIALIA; Año: 2004 vol. 50 p. 331 - 335

PABLO DAVID; JUAN MASSONE; ROBERTO BOERI; JORGE SIKORA

Mechanical Properties of Thin Wall Ductile Iron ? Influence of Carbon Equivalent and Graphite Distribution

ISIJ INTERNATIONAL; Año: 2004 vol. 44 p. 1180 - 1187

MARTIN CALDERA; JUAN MASSONE; ROBERTO BOERI; JORGE SIKORA

Impact Properties of Thin Wall Ductile Iron

ISIJ INTERNATIONAL; Año: 2004 vol. 44 p. 731 - 736

GIACOPINI, A.; BOERI, R.E.; SIKORA, J.A.

Carbide dissolution in thin wall ductile iron

MATERIALS SCIENCE AND TECHNOLOGY; Año: 2003 vol. 19 p. 1755 - 1760