INQUIMAE   12526
INSTITUTO DE QUIMICA, FISICA DE LOS MATERIALES, MEDIOAMBIENTE Y ENERGIA
Unidad Ejecutora - UE
congresos y reuniones científicas
Título:
Several electrochemical devices for biomolecular detection
Autor/es:
GRACIELA A. GONZÁLEZ*, ANA SOL PEINETTI, SOFÍA CARUGNO, MAURICIO GÜNTHER, GRACIELA PRIANO, DIEGO PALLAROLA, AND FERNANDO BATTAGLINI
Lugar:
Playa del Carmen, Mexico
Reunión:
Conferencia; Electrochemistry Zing Conference; 2009
Institución organizadora:
Zing Conference
Resumen:
Resumen de la Presentación Oral
We report two examples of electrochemical systems aimed to sensor development. One is
based on amperometric detection, using an inexpensive eight gold electrode array1. The
array is manufactured by a combination of screen printing and gold electrodeposition
techniques, used with a multipotenciostat, works as an efficient array to develop
recognition assays with electrochemical detection. The detection of lipopolysaccharides
and peroxidase, as examples of competitive or sandwich assays, will be presented.
The other application compromises a nanoporous membrane2 placed close to the working
electrode. In this case the signal is generated by a probe; therefore there is no need for
analytes or labeled analytes able to produce an amperometric response. Two types of
membranes were studied. The experimental results of the electrochemical system were
modeled by numerical simulation. The effect of porous domains in the amperometric
response of cyclic voltammetry experiments is simulated to establish the sensitivity of this
system to detect molecules able to block the pores. The generated data is in good
agreement with experimental results.
The experimental sensitivity of the three systems can be observed through the current
response of modified surface with anti-HRP-HRP complex.1. The
array is manufactured by a combination of screen printing and gold electrodeposition
techniques, used with a multipotenciostat, works as an efficient array to develop
recognition assays with electrochemical detection. The detection of lipopolysaccharides
and peroxidase, as examples of competitive or sandwich assays, will be presented.
The other application compromises a nanoporous membrane2 placed close to the working
electrode. In this case the signal is generated by a probe; therefore there is no need for
analytes or labeled analytes able to produce an amperometric response. Two types of
membranes were studied. The experimental results of the electrochemical system were
modeled by numerical simulation. The effect of porous domains in the amperometric
response of cyclic voltammetry experiments is simulated to establish the sensitivity of this
system to detect molecules able to block the pores. The generated data is in good
agreement with experimental results.
The experimental sensitivity of the three systems can be observed through the current
response of modified surface with anti-HRP-HRP complex.2 placed close to the working
electrode. In this case the signal is generated by a probe; therefore there is no need for
analytes or labeled analytes able to produce an amperometric response. Two types of
membranes were studied. The experimental results of the electrochemical system were
modeled by numerical simulation. The effect of porous domains in the amperometric
response of cyclic voltammetry experiments is simulated to establish the sensitivity of this
system to detect molecules able to block the pores. The generated data is in good
agreement with experimental results.
The experimental sensitivity of the three systems can be observed through the current
response of modified surface with anti-HRP-HRP complex.