INENCO   05446
INSTITUTO DE INVESTIGACIONES EN ENERGIA NO CONVENCIONAL
Unidad Ejecutora - UE
artículos
Título:
Passive Solar Radiant System, Sirasol. Physical-Mathematical Modeling and Sensitivity Analysis
Autor/es:
M. VICTORIA MERCADO, ALFREDO ESTEVES, CELINA FILIPPÍN, SILVANA FLORES LARSEN
Revista:
SOLAR ENERGY
Editorial:
PERGAMON-ELSEVIER SCIENCE LTD
Referencias:
Lugar: Amsterdam; Año: 2013 vol. 96 p. 10 - 20
ISSN:
0038-092X
Resumen:
When using passive solar heating systems, it is necessary to have available an Equator-facing facade on which to install them. Rooms without such a facade are not the best option for conventional passive solar heating systems. SIRASOL is a passive solar radiant system that captures solar energy and is to be installed in the ceiling of the room. This room must not necessarily have an Equator-facing facade. Solar energy heats up a metal sheet, which is the radiant panel, which transfers heat by long-wave radiation to the room below it. This paper presents a mathematical model and a sensitivity analysis. The mathematical model was used to analyze radiant panel temperature, radiant mean temperature, operative temperature and panel surface area. Results of the sensitivity study showed that when solar radiation rises (from 200 to 800W) panel temperature increases from 36°C to 92°C, whereas variations in outside and inside air temperature have a negligible impact on the panel temperature. Thus, the use of SIRASOL is possible in locations with clear skies. Moreover, from panel temperature values we calculated mean radiant temperature and thereby the room?s operative temperature, which is proportional to the radiant panel area. When this area is 50% of the room?s floor area, operative temperature grows 3.1ºC higher than inside air temperature when solar radiation is 500W/m2. The analysis shows that a thermal asymmetry appears only when SIRASOL?s surface area to floor area ratio is higher than 32%.