Combined PFPD - FID assessment of sulfur in liquid fuels

D. DEL RÍO; U. SEDRAN; G. DE LA PUENTE

FUEL PROCESSING TECHNOLOGY

ELSEVIER SCIENCE BV

Lugar: Amsterdam; Año: 2011 vol. 92 p. 2278 - 2284

0378-3820

A pulsed flame photometric detector (PFPD) was calibrated using standard sulfur compounds present in gasoline and diesel fuels, in combination with a flame ionization detector (FID). Gasoline range standards were added to a hydrocarbon mixture simulating gasoline, with individual sulfur concentrations from 3 to 80 ppm. Diesel range standards were added to a low sulfur commercial diesel fuel, with sulfur concentrations from 10 to 100 ppm. In gasoline, both the chromatographic areas calculated with the linearized signal (data points elevated to a given power), and reported by the instrument were regressioned with the sulfur mass concentrations. In both cases the areas were normalized with the FID areas to reduce deviations. Results were better when using the linearized signal. Only the normalized areas calculated with the linearized signal can be used in the case of the diesel, due to significant peak coelution. Individual calibration coefficients were calculated for each standard, but overall coefficients can be used safely in each of the boiling ranges. The compliance of regulations about sulfur was verified in commercial fuels and the different sulfur compounds were inspected. The simultaneous combined FID-PFPD use allows adding the sulfur to the conventionalanalysis of liquid fuels (e.g. composition, simulated distillation).